Table of Contents
Advertisement
Step 3:
If Setup correctly recognizes the driver in the floppy disk, a controller menu similar to
below will appear. If you want to install Windows XP, use the ARROW keys to select
VIA V-RAID Controller for Windows XP* and press ENTER. Then it will begin to load
the SATA driver from the floppy disk.
Windows Setup
============
You have chosen to configure a SCSI Adapter for use with Windows,
using a device support dick provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following list, or press ESC
to return to the previous screen.
VIA V-RAID Controller Series(Windows XP/SRV2003)
VIA V-RAID Controller Series(Windows XP/SRV2003-x64)
VIA V-RAID Controller Series(Windows 2K)
VIA V-RAID Controller Series(Windows NT4)
ENTER= Select F3=Exit
Step 4:
When the screen as shown below appears, press ENTER to continue the SATA
driver installation from the floppy disk. The driver installation will be finished in about
one minute.
QDSP-1000/ 1010 User's Manual
25
Chapter 3
Advertisement
Table of Contents
