About the warming zone
Setting the warming zone
• Touch the ON OFF key to activate the warming
zone.
• Press the desired power level key once (hi+,
med or lo-) for the quick automatic settings or
for more precise level settings use the hi+ or lo-
keys. Each press of the hi+ will increase or lo-
keypad will decrease the power one level. Any
of these power level changes may be made any
time during the warming process.
For best results
• Always start with hot cooked food.
• When warming pastries or breads the cover
should have an opening to allow moisture to
escape.
• All food placed on the warming zone should be
covered with a lid to maintain moisture.
NOTES
• Pressing a cooktop ON OFF key only
activates or deactivates the warming zone but
will not start the heating process. Activating
and powering any surface cooktop zone
requires pressing two keys - the ON OFF key
first and then a power level selection (+, - or
med) must be added before the cooktop zone
will begin heating.
• Any of the cooking zones will begin to heat
ONLY when activated -See Fig 2 pg 18. If a
power level is not added to the active cooking
zone within 10 seconds of being active the
control will automatically deactivate the
cooking zone.
• If activating a surface cooking zone when no
surface cooking zones are active, you will
need to press and hold the ON OFF key for a
few seconds longer than normal before the
first cooking zone will activate. Once any
cooking zone is active, any zones added will
respond immediately.
Display Abbreviations
List of displayed abbreviations
See the chart below for common abbreviations
that you may see while using your appliance.
Abbreviantions Chart
Message
CLn
CLO
dEF
d-O
End
F10*
Hi
Hot
Lo
Loc
SAb
Sd
SF
CF
*This is an example of a fault code that you may
see. These codes will help your servicer repair
your appliance.
Message
explanation
Self clean
Setting the clock
Defrost
Door open
End of cycle
Fault code error
Hi setting
Hot oven
Lo setting
Control lock
Sabbath mode
Demo mode
Sabbath mode failure
Check food
19