Dynamically Choosing A Boot Device Using The F9 Prompt; Setting A Multiboot Express Prompt; Entering Multiboot Express Preferences - HP elitebook 820 G2 Maintenance And Service Manual
Hide thumbs
Also See for elitebook 820 G2:
- Maintenance and service manual (136 pages) ,
- Disassembly instructions manual (19 pages)
Table of Contents
Advertisement
To move the device down in the boot order, use a pointing device to click the down arrow, or press the
key.
5.
To save your changes and exit Computer Setup, click the Save icon in the lower-left corner of the screen,
and then follow the on-screen instructions.
– or –
Use the arrow keys to select Main > Save Changes and Exit, and then press enter.
Dynamically choosing a boot device using the f9 prompt
To dynamically choose a boot device for the current startup sequence, follow these steps:
1.
Open the Select Boot Device menu by turning on or restarting the computer, and then pressing
the "Press the ESC key for Startup Menu" message is displayed at the bottom of the screen.
2.
Press f9.
3.
Use a pointing device or the arrow keys to select a boot device, then press enter.
Setting a MultiBoot Express prompt
To start Computer Setup and set the computer to display the MultiBoot startup location menu each time the
computer is started or restarted, follow these steps:
1.
Turn on or restart the computer, and then press
message is displayed at the bottom of the screen.
2.
Press
3.
Use a pointing device or the arrow keys to select Advanced > Boot Options > MultiBoot Express Boot
Popup Delay (Sec), and then press enter.
4.
In the MultiBoot Express Popup Delay (Sec) field, enter the length of time in seconds that you want the
computer to display the startup location menu before it defaults to the current MultiBoot setting. (When
0 is selected, the Express Boot startup location menu is not displayed.)
5.
To save your changes and exit Computer Setup, click the Save icon in the lower-left corner of the screen,
and then follow the on-screen instructions.
– or –
Use the arrow keys to select Main > Save Changes and Exit, and then press enter.
Your changes go into effect when the computer restarts.
Entering MultiBoot Express preferences
When the Express Boot menu is displayed during startup, you have the following choices:
To specify a boot device from the Express Boot menu, select your preference within the allotted time,
●
and then press enter.
To prevent the computer from defaulting to the current MultiBoot setting, press any key before the
●
allotted time expires. The computer will not start until you select a boot device and press enter.
●
To allow the computer to start according to the current MultiBoot settings, wait for the allotted time to
expire.
92
Chapter 8 Computer Setup (BIOS) and MultiBoot in Windows 8.1
f10
to enter Computer Setup.
esc
while the "Press the ESC key for Startup Menu"
-
esc
while
Hide quick links:
Advertisement
Table of Contents
