hit counter script
Sony STR-DG710 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Receiver
  5. STR-DG710
  6. Service manual
Sony STR-DG710 Service Manual

Sony STR-DG710 Service Manual

Multi channel av receiver
Hide thumbs Also See for STR-DG710:
Table of Contents

Advertisement

Quick Links

Download this manual
QQ
3 7 63 1515 0

SERVICE MANUAL

Ver. 1.0 2007.03
Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic", "Surround EX", and the double-D
symbol are trademarks of Dolby Laboratories.
"DTS", "DTS-ES Neo:6" are registered trademarks
of DTS, Inc. "96/24" is a trademark of DTS, Inc.
This receiver incorporates High-Definition
Multimedia Interface (HDMI
TE
HDMI, the HDMI logo and High-Definition
L 13942296513
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
Amplifier section
Models of area code US, CND
Minimum RMS Output Power (8 ohms, 20 Hz – 20 kHz,
THD 0.09%)
Stereo Mode Output Power (8 ohms, 1 kHz, THD 1%)
Surround Mode Output Power
Models of area code AEP, UK, E, AUS
Minimum RMS Output Power (8 ohms, 20 Hz – 20 kHz,
THD 0.09%)
Stereo Mode Output Power (8 ohms, 1 kHz, THD 1%)
Surround Mode Output Power
Models of area code SP
3)
Minimum RMS Output Power (8 ohms, 20 Hz – 20 kHz,
THD 0.09%)
Stereo Mode Output Power (8 ohms, 1 kHz, THD 1%)
Surround Mode Output Power
1) Measured under the following conditions:
Area code
www
US, CND
.
Sony Corporation
9-887-623-01
2007C04-1
Home Audio Division
© 2007.03
Published by Sony Techno Create Corporation
http://www.xiaoyu163.com
TM
) technology.
1)
95 W + 95 W
105 W + 105 W
2)
(8 ohms, 1 kHz, THD 10%)
140 W/ch
3)
85 W + 85 W
100 W + 100 W
2)
(8 ohms, 1 kHz, THD 10%)
140 W/ch
70 W + 70 W
80 W + 80 W
2)
(8 ohms, 1 kHz, THD 10%)
120 W/ch
Power requirements
120 V AC, 60 Hz
x
ao
u163
y
i
http://www.xiaoyu163.com
STR-DG710
2 9
8
XM is a registered trademark of XM Satellite Radio Inc.
AUDIO POWER SPECIFICATIONS (US model)
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
With 8 ohm loads, both channels driven, from 20 – 20,000 Hz;
rated 95 watts per channel minimum RMS power, with no
more than 0.09% total harmonic distortion from 250 milliwatts
to rated output.
Q Q
3
6 7
1 3
1 5
SPECIFICATIONS
2) Reference power output for front, center, surround and
surround back speakers. Depending on the sound field
settings and the source, there may be no sound output.
3) Measured under the following conditions:
Area code
AEP, UK, E, SP
AUS
Frequency response
Analog
Inputs
Analog
Digital (Coaxial)
Digital (Optical)
Outputs (Analog)
AUDIO OUT
SUB WOOFER
Equalizer
Gain levels
4) INPUT SHORT (with sound field and equalizer bypassed).
5) Weighted network, input level.
MULTI CHANNEL AV RECEIVER
co
.
9 4
2 8
US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
0 5
8
2 9
9 4
2 8
Power requirements
230 V AC, 50 Hz
240 V AC, 50 Hz
10 Hz – 70 kHz
+0.5/–2 dB (with sound field
and equalizer bypassed)
Sensitivity: 500 mV/50 kohms
S/N
4)
: 96 dB (A, 500 mV
5)
)
Impedance: 75 ohms
S/N: 100 dB (A, 20 kHz LPF)
S/N: 100 dB (A, 20 kHz LPF)
Voltage: 500 mV/10 kohms
Voltage: 2 V/1 kohm
±6 dB, 1 dB step
– Continued on next page –
m
9 9
9 9
1

Advertisement

Table of Contents
loading

Related Manuals for Sony STR-DG710

Summary of Contents for Sony STR-DG710

  • Page 1: Service Manual

    – Continued on next page – 1) Measured under the following conditions: Area code Power requirements US, CND 120 V AC, 60 Hz MULTI CHANNEL AV RECEIVER u163 Sony Corporation 9-887-623-01 2007C04-1 Home Audio Division © 2007.03 Published by Sony Techno Create Corporation http://www.xiaoyu163.com...
  • Page 2 CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU IN SUPPLEMENTS PUBLISHED BY SONY.
  • Page 3 STR-DG710 3 7 63 1515 0 SAFETY CHECK-OUT (US MODEL) MODEL IDENTIFICATION After correcting the original service problem, perform the follow- — BACK PANEL — ing safety check before releasing the set to the customer: Check the antenna terminals, metal trim, “metallized” knobs, screws, and all other exposed metal parts for AC leakage.

  • Page 4: Table Of Contents

    STR-DG710 3 7 63 1515 0 TABLE OF CONTENTS 1. GENERAL Description and location of parts ..........5 2. DISASSEMBLY 2-1. Case ................... 10 2-2. Back Panel Section ............11 2-3. Front Panel Section ............11 2-4. DIGITAL Board ..............12 2-5.

  • Page 5: General

    STR-DG710 SECTION 1 GENERAL 3 7 63 1515 0 This section is extracted from instruction manual. • US, Canadian MODEL Name Function Getting Started L 2CH Press to select a sound field (page 49). A.F.D. Description and location of parts...
  • Page 6 ANTENNA wire antenna RM-AAU014 to operate the receiver and to jack (aerial) supplied with this receiver control the Sony audio/video components that (page 25). the remote is assigned to operate (page 74). Connects to the AM DIGITAL DVD IN VIDEO 2/BD IN...
  • Page 7 STR-DG710 3 7 63 1515 0 Name Function S -/-- Press -/-- and TV (M) at the same time to select the channel entry mode, either one or two digits of the TV. >10/ Press to select – track numbers over 10 of the VCR, satellite tuner or CD player.

  • Page 8: Str-Dg710 Qq

    ANTENNA wire antenna RM-AAU015 to operate the receiver and to jack (aerial) supplied with this receiver control the Sony audio/video components that (page 24). the remote is assigned to operate (page 67). Connects to the AM DIGITAL DVD IN VIDEO 2/BD IN...
  • Page 9 TUNING +/– Press to scan a station. buttons of the TV, VCR or are factory assigned to control disc player. Sony components as follows. satellite tuner. M TV Press TV and the button you Press DISPLAY and TV (M) Yo u can change the button...

  • Page 10: Disassembly

    STR-DG710 SECTION 2 DISASSEMBLY 3 7 63 1515 0 Note : This set can be disassemble according to the following sequence. 2-1. CASE (Page 10) 2-2. BACK PANEL SECTION (Page 11) 2-3. FRONT PANEL SECTION (Page 11) 2-4. DIGITAL BOARD 2-6.

  • Page 11: Back Panel Section

    STR-DG710 3 7 63 1515 0 2-2. BACK PANEL SECTION 9 screw 0 three screws (+BVTP 3 × 8) (+BVTP 3 × 8) 8 three screws (+BVTP 3 × 8) 3 wire (flat type) (7 core) (CN3512) qa two screws (+BVTP 3 ×...

  • Page 12: Digital Board

    STR-DG710 3 7 63 1515 0 2-4. DIGITAL BOARD 3 CNP512 (3P) 1 CNP505 (7P) 2 CNP506 (8P) 5 DIGITAL board 4 screw (+BVTP 3 × 8) L 13942296513 2-5. MAIN BOARD SECTION 3 CNP912 (2P) 4 CN915 (5P)

  • Page 13: Standby Board

    STR-DG710 3 7 63 1515 0 2-6. STANDBY BOARD 4 screw 1 CNP902 (2P) (+BVTP 3 × 8) 2 CNP804 (3P) 5 STANDBY board 3 CNP805 (3P) L 13942296513 u163 http://www.xiaoyu163.com...

  • Page 14: Test Mode

    STR-DG710 SECTION 3 TEST MODE 3 7 63 1515 0 AM CHANNEL STEP 9 kHz/10 kHz SELECTION KEY CHECK MODE MODE * Button check * Procedure: * Either the 9 kHz step or 10 kHz step can be selected for the AM While depressing the [SPEAKERS $OFF/A/B%] and the [2CH] but- channel step.

  • Page 15: Fm Tuner Check

    STR-DG710 SECTION 4 FM TUNER CHECK 3 7 63 1515 0 1. DCAC DSP Data Line Checking FM AUTO STOP CHECK After press the [TUNING MODE], DCAC Factory test mode will start, (1) Turn on the set. below display will show: (2) Input the following signal from Signal Generator to FM “DCAC[][][]x”...

  • Page 16: Diagrams

    STR-DG710 SECTION 5 DIAGRAMS 3 7 63 1515 0 5-1. CIRCUIT BOARDS LOCATION STANDBY board DCDC board VIDEO board HDMI RE board XM board POWER KEY board DCAC board HEADPHONE board VIDEO 3 board DIGITAL board DISPLAY board MAIN board...

  • Page 17: Block Diagram - Tuner/Audio Section

    STR-DG710 3 7 6 3 1 5 1 5 0 5-2. BLOCK DIAGRAM — TUNER/AUDIO SECTION — VIDEO 3 IN/ PORTABLE AV IN VIDEO 1 SA-CD/CD/CD-R VIDEO 1 AUDIO AUDIO IN AUDIO IN AUDIO IN AUDIO OUT –7V FUNCTION SELECT...

  • Page 18: Block Diagram - Digital Section

    STR-DG710 3 7 6 3 1 5 1 5 0 5-3. BLOCK DIAGRAM — DIGITAL SECTION — D/A CONVERTER A/D CONVERTER DIGITAL SIGNAL PROCESSOR IC1452 IC1401 IC1501 IC1403 L IN TUNER/ VOUT5 L-IN DIGITAL DOUT L OUT ∆Σ DATA3...

  • Page 19: Block Diagram - Video Section

    STR-DG710 3 7 6 3 1 5 1 5 0 5-4. BLOCK DIAGRAM — VIDEO SECTION — COMPONENT VIDEO SELECT IC304 V+1,+2 6dB AMP +5V-3 J302 CH1 IN1 J301 CH1 OUT 75Ω CH1 IN2 –1 DRIVER CH1 IN3 –1...

  • Page 20: Block Diagram - Hdmi Re Section

    STR-DG710 3 7 6 3 1 5 1 5 0 5-5. BLOCK DIAGRAM — HDMI RE SECTION — SWITCHER DATA BUFFER EEPROM DATA SELECT EEPROM IC3503 IC3507 IC3521 IC3509 HDMI SPDIF DIGITAL SDA_SINK 3 SDAA SDAB HDMI ERROR DATA2+...

  • Page 21: Block Diagram - Xm Section

    STR-DG710 3 7 6 3 1 5 1 5 0 5-6. BLOCK DIAGRAM — XM SECTION — • US, Canadian model only. XM DIGITAL TRANSCEIVER IC102 XM MIXMO KEY/DISPLAY SCTXOUT SCRXIN XM MOXMI SECTION (Page 22) 18 COMRXP D/A CONVERTER...

  • Page 22: Block Diagram - Key/Display Section

    STR-DG710 3 7 6 3 1 5 1 5 0 5-7. BLOCK DIAGRAM — KEY/DISPLAY SECTION — FL DISPLAY DRIVER SYSTEM J2000 MIC AMP IC100 CONTROL AUTO CAL MIC IC2000 IC1907 (5/6) BUFFER 113 DCAC IN IC101 SEG1 FL_LAT...

  • Page 23: Block Diagram - Output/Power Section

    STR-DG710 3 7 6 3 1 5 1 5 0 5-8. BLOCK DIAGRAM — OUTPUT/POWER SECTION — J790 R–CH PHONES RY791 PRE DRIVER RELAY IC701 DRIVER TB001 (1/2) Q790 +VOUT2 IN 2 DRIVE –VOUT2 L–CH DRIVE POWER AMP Q701–704...
  • Page 24 STR-DG710 3 7 6 3 1 5 1 5 0 • Waveforms THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. — DIGITAL Board — — XM Board — (In addition to this, the necessary note is printed in each block.)

  • Page 25: Printed Wiring Boards - Main Section

    STR-DG710 3 7 6 3 1 5 1 5 0 5-9. PRINTED WIRING BOARDS — MAIN SECTION — • Refer to page 16 for Circuit Boards Location. : Uses unleaded solder. SPEAKERS IMPEDANCE USE 8-16Ω TM602 TB001 TM603 FRONT A...

  • Page 26: Schematic Diagram - Main Section (1/2)

    STR-DG710 3 7 6 3 1 5 1 5 0 5-10. SCHEMATIC DIAGRAM — MAIN SECTION (1/2) — • Refer to page 46 for IC Block Diagrams. M A I N B O A R D ( 1 / 2 )

  • Page 27: Schematic Diagram - Main Section (2/2)

    STR-DG710 3 7 6 3 1 5 1 5 0 5-11. SCHEMATIC DIAGRAM — MAIN SECTION (2/2) — • Refer to page 46 for IC Block Diagrams. M A I N B O A R D ( 2 / 2 )

  • Page 28: Printed Wiring Board - Digital Section (1/2)

    STR-DG710 3 7 6 3 1 5 1 5 0 5-12. PRINTED WIRING BOARD — DIGITAL SECTION (1/2) — • Refer to page 16 for Circuit Boards Location. : Uses unleaded solder. (Page 36) HDMI RE • Semiconductor BOARD...

  • Page 29: Printed Wiring Board - Digital Section (2/2)

    STR-DG710 3 7 6 3 1 5 1 5 0 5-13. PRINTED WIRING BOARD — DIGITAL SECTION (2/2) — • Refer to page 16 for Circuit Boards Location. : Uses unleaded solder. (Page 25) (Page 44) (Page 40) MAIN...

  • Page 30: Schematic Diagram - Digital Section (1/3)

    STR-DG710 3 7 6 3 1 5 1 5 0 • Refer to page 24 for Waveforms. • Refer to page 46 for IC Block Diagrams. 5-14. SCHEMATIC DIAGRAM — DIGITAL SECTION (1/3) — • Refer to page 55 for IC Pin Description.

  • Page 31: Schematic Diagram - Digital Section (2/3)

    STR-DG710 3 7 6 3 1 5 1 5 0 • Refer to page 24 for Waveforms. • Refer to page 47 for IC Block Diagrams. 5-15. SCHEMATIC DIAGRAM — DIGITAL SECTION (2/3) — • Refer to page 57 for IC Pin Description.

  • Page 32: Schematic Diagram - Digital Section (3/3)

    STR-DG710 3 7 6 3 1 5 1 5 0 5-16. SCHEMATIC DIAGRAM — DIGITAL SECTION (3/3) — • Refer to page 48 IC Block Diagrams. (Page 30) D I G I TA L B O A R D ( 1 / 3 )

  • Page 33: Printed Wiring Boards - Dcac, Power Key Section

    STR-DG710 3 7 6 3 1 5 1 5 0 5-17. PRINTED WIRING BOARDS — DCAC, POWER KEY SECTION — 5-18. SCHEMATIC DIAGRAM — DCAC, POWER KEY SECTION — • Refer to page 16 for Circuit Boards Location. : Uses unleaded solder.

  • Page 34: Printed Wiring Boards - Video Section

    STR-DG710 3 7 6 3 1 5 1 5 0 5-19. PRINTED WIRING BOARDS — VIDEO SECTION — • Refer to page 16 for Circuit Boards Location. : Uses unleaded solder. J301 J302 COMPONENT VIDEO SAT IN DVD IN...

  • Page 35: Schematic Diagram - Video Section

    STR-DG710 3 7 6 3 1 5 1 5 0 5-20. SCHEMATIC DIAGRAM — VIDEO SECTION — • Refer to page 49 for IC Block Diagrams. V I D E O 3 B O A R D C N 2 0 1...

  • Page 36: Printed Wiring Board - Hdmi Re Section (1/2)

    STR-DG710 3 7 6 3 1 5 1 5 0 5-21. PRINTED WIRING BOARD — HDMI RE SECTION (1/2) — • Refer to page 16 for Circuit Boards Location. : Uses unleaded solder. HDMI VIDEO 2/BD IN DVD IN •...

  • Page 37: Printed Wiring Board - Hdmi Re Section (2/2)

    STR-DG710 3 7 6 3 1 5 1 5 0 5-22. PRINTED WIRING BOARD — HDMI RE SECTION (2/2) — • Refer to page 16 for Circuit Boards Location. : Uses unleaded solder. HDMI RE BOARD (SIDE B) R3502...

  • Page 38: Schematic Diagram - Hdmi Re Section (1/2)

    STR-DG710 3 7 6 3 1 5 1 5 0 • Refer to page 24 for Waveforms. Note: When IC3511 and IC3513 on the HDMI RE board are • Refer to page 50 for IC Block Diagrams. damaged, exchange the new HDMI RE board for the 5-23.

  • Page 39: Schematic Diagram - Hdmi Re Section (2/2)

    STR-DG710 3 7 6 3 1 5 1 5 0 • Refer to page 24 for Waveforms. Note: When IC3511 and IC3513 on the HDMI RE board are • Refer to page 51 for IC Block Diagrams. damaged, exchange the new HDMI RE board for the 5-24.

  • Page 40: Printed Wiring Board - Xm Section

    STR-DG710 3 7 6 3 1 5 1 5 0 5-25. PRINTED WIRING BOARD — XM SECTION (US, Canadian MODEL ONLY) — • Refer to page 16 for Circuit Boards Location. : Uses unleaded solder. B C E (Page 29)

  • Page 41: Schematic Diagram - Xm Section

    STR-DG710 3 7 6 3 1 5 1 5 0 • Refer to page 24 for Waveforms. 5-26. SCHEMATIC DIAGRAM — XM SECTION (US, Canadian MODEL ONLY) — • Refer to page 52 for IC Block Diagrams. R135 R152...

  • Page 42: Printed Wiring Board - Display Section

    STR-DG710 3 7 6 3 1 5 1 5 0 5-27. PRINTED WIRING BOARD — DISPLAY SECTION — • Refer to page 16 for Circuit Boards Location. : Uses unleaded solder. DISPLAY BOARD TP102 R105 R110 R109 R107 R106...

  • Page 43: Schematic Diagram - Display Section

    STR-DG710 3 7 6 3 1 5 1 5 0 5-28. SCHEMATIC DIAGRAM — DISPLAY SECTION — • Refer to page 53 for IC Block Diagrams. D I S P L AY B O A R D F L 1 0 1...

  • Page 44: Printed Wiring Board - Power Section

    STR-DG710 3 7 6 3 1 5 1 5 0 5-29. PRINTED WIRING BOARD — POWER SECTION — 5-30. SCHEMATIC DIAGRAM — POWER SECTION — • Refer to page 16 for Circuit Boards Location. : Uses unleaded solder. (Page 25)

  • Page 45: Printed Wiring Board - Dcdc Section

    STR-DG710 3 7 6 3 1 5 1 5 0 5-31. PRINTED WIRING BOARD — DCDC SECTION — 5-32. SCHEMATIC DIAGRAM — DCDC SECTION — • Refer to page 54 for IC Block Diagrams. • Refer to page 16 for Circuit Boards Location.
  • Page 46 STR-DG710 3 7 6 3 1 5 1 5 0 • IC Block Diagrams IC401 BD3451KS (MAIN Board (1/2)) IC1301 LC89056W-E (DIGITAL Board (1/3)) 12 11 10 9 8 7 6 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67...
  • Page 47 STR-DG710 3 7 63 1515 0 IC1302 TC74ACT153F(EL) (DIGITAL Board (1/3)) IC1017 TC7WH157FK (DIGITAL Board (1/3)) DATA INPUTS OUTPUT STROBE 2C3 2C2 2C1 2C0 2C3 2C2 2C1 2C0 1C3 1C2 1C1 1C0 STROBE 1C3 1C2 1C1 1C0 OUTPUT DATA INPUTS...
  • Page 48 STR-DG710 3 7 63 1515 0 IC1401 PCM1803DBR (DIGITAL Board (3/3)) 5 th Order Single-End MODE1 Delta-Sigma LIN 1 /Differential Modulator MODE0 RIN 2 Converter Serial FMT1 V REF 1 3 Interface FMT0 V REF 2 4 × 1/64 (× 1/128)
  • Page 49 STR-DG710 3 7 63 1515 0 IC203 NJM2595D (VIDEO Board) M.OUT 16 VCC 75Ω DRIVER V1OUT L 13942296513 IC304 NJM2586AL (VIDEO Board) 75Ω CH1_IN1 CH1_OUT DRIVER BIAS CONT1 P.SAVE 75Ω CH1_IN2 CH2_OUT DRIVER BIAS CONT1 CONT2 75Ω CH1_IN3 CH3_OUT...
  • Page 50 STR-DG710 3 7 63 1515 0 IC3503 TMDS341APFCR (HDMI RE Board (1/2)) 80 79 RX W/EQ RX W/EQ RX W/EQ RX W/EQ SDA1 RX W/EQ SCL1 RX W/EQ RX W/EQ RX W/EQ RX W/EQ RX W/EQ RX W/EQ RX W/EQ...
  • Page 51 STR-DG710 3 7 63 1515 0 IC3521 SN74LV4052APWR (HDMI RE Board (1/2)) IC3504 SN74LV4052APWR (HDMI RE Board (2/2)) 2-COM 1-COM IC3513 SII9030CTU-7 (HDMI RE Board (2/2)) L 13942296513 HSYNC 60 CGND VSYNC 59 CVCC18 VIDEO DATA CAPTURE / DE GEN / 656 LOGIC BLOCK...
  • Page 52 STR-DG710 3 7 63 1515 0 IC3516 TK11150CSCL-G (HDMI RE Board (2/2)) VOLTAGE COMP CONTROL IC102 F2602E-01-TR (XM Board) HIGH SPEED I2SDATA 24 VSS DATA PORT (HSDP) 23 COMTXP I2SSCLK 22 COMTXM 21 VSS I2SLRCLK 20 VDD 19 COMRXM...
  • Page 53 STR-DG710 3 7 63 1515 0 IC106 BA00CC0WT(-V5) (XM Board) VREF DRIVER IC100 PT6315 (DISPLAY Board) Grid driver Multiplexed driver L 13942296513 GRID10 Command decoder GRID11 Display memory SEG17 24 bits x 12 words Timing generator key scan DOUT...
  • Page 54 STR-DG710 3 7 63 1515 0 IC4001 SI-8050S-LF1101 (DCDC Board) OVER REGULATOR CURRENT PROTECTOR LATCH RESET & DRIVER OVER HEAT – PROTECTOR COMPARATOR – VREF ERROR AMP L 13942296513 IC4100 SI-8033S (DCDC Board) OVER CURRENT REGULATOR PROTECTOR LATCH RESET &...
  • Page 55 STR-DG710 3 7 63 1515 0 • IC Pin Descriptions IC1501 CXD9718BQ (DIGITAL SIGNAL PROCESSOR) (DIGITAL BOARD (1/3)) Pin No . Pin Name Pin Descr iption — Ground pin XRST Reset signal input from system control IC EXTIN Not used. (Connect to ground.) LRCKI3 Not used.
  • Page 56 STR-DG710 3 7 63 1515 0 Pin No . Pin Name Pin Descr iption MOD1 Operation mode signal input (L: 386fs, H: 256fs) (Fixed at H.) MOD0 Operation mode signal input (L: single chip mode, H: use prohibited) (Fixed at L.)
  • Page 57 STR-DG710 3 7 63 1515 0 IC1907 MB91353APMT-G-112E1 (SYSTEM CONTROL) (DIGITAL BOARD (2/3)) Pin No. Pin Name Pin Description HDMI MUTE HDMI mute signal input HDMI RESET/HDMI PRE HDMI reset signal output XM RESET XM reset signal output XMDACMDI/...
  • Page 58 STR-DG710 3 7 63 1515 0 Pin No . Pin Name Pin Descr iption DIR ERROR Digital audio interface receiver error signal input DIR XSTATE Digital audio interface receiver state signal input Non Maskable interrupt input Operation mode setting pin 2 Operation mode setting pin 1 (Connect to GND.)
  • Page 59 STR-DG710 3 7 63 1515 0 Pin No . Pin Name Pin Descr iption HD IN HD signal output from digital signal processor HD CLK HD serial clock signal output from digital signal processor FLASH2/C LINK Flash signal input...
  • Page 60 STR-DG710 3 7 63 1515 0 IC3511 SII9011CLU (HDMI RX) (HDMI RE BOARD (1/2)) Pin No . Pin Name Pin Descr iption VSYNC Vertical synchronize signal output for HDMI TX. 2 to 5 QO23 to QO20 — Not used. (Open) IOGND —...
  • Page 61 STR-DG710 3 7 63 1515 0 Pin No . Pin Name Pin Descr iption 71 to 74 SD3 to SD0 Serial data output for DSP and HDMI TX. Word select signal output for DSP and HDMI TX. Serial clock signal output for DSP and HDMI TX.
  • Page 62 STR-DG710 3 7 63 1515 0 IC3513 SII9030CTU-7 (HDMI TX) (HDMI RE BOARD (2/2)) Pin No . Pin Name Pin Descr iption HSYNC Horizontal synchronize signal input from HDMI RX. VSYNC Vertical synchronize signal input from HDMI RX. CGND —...
  • Page 63 STR-DG710 3 7 63 1515 0 Pin No . Pin Name Pin Descr iption 61 to 65 D13 to D9 Serial data input 13 to 9 from HDMI RX and video processor. IDCK Output data clock signal input from HDMI RX.

  • Page 64: Exploded Views

    STR-DG710 SECTION 6 EXPLODED VIEWS 3 7 63 1515 0 NOTE: The components identified by mark 0 or • The mechanical parts with no reference • Color Indication of Appearance Parts dotted line with mark 0 are critical for safety.

  • Page 65: Front Panel Section

    STR-DG710 3 7 63 1515 0 6-2. FRONT PANEL SECTION not supplied not supplied (DCAC board) (HEADPHONE board) not supplied (POWER KEY board) not supplied (VIDEO 3 board) FL101 L 13942296513 not supplied supplied with RV101,103 supplied with RV102 Ref.

  • Page 66: Back Panel Section

    STR-DG710 3 7 63 1515 0 6-3. BACK PANEL SECTION not supplied not supplied L 13942296513 not supplied (VIDEO board) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 0 109 1-828-953-11 WIRE (FLAT TYPE) (9 CORE) (EXCEPT AEP,UK)

  • Page 67: Chassis Section

    STR-DG710 3 7 63 1515 0 6-4. CHASSIS SECTION not supplied (STANDBY board) F901 not supplied (DCDC board) F4002 F4001 Q603 Q654 Q653 Q604 Q704 Q703 Q504 Q754 Q503 Q533 Q753 Q534 T901 not supplied L 13942296513 not supplied not supplied Ref.

  • Page 68: Electrical Parts List

    STR-DG710 SECTION 7 DCAC DCDC ELECTRICAL PARTS LIST 3 7 63 1515 0 NOTE: The components identified by mark 0 or • Due to standardization, replacements in • SEMICONDUCTORS dotted line with mark 0 are critical for safety. the parts list may be different from the In each case, u : µ, for example:...
  • Page 69 STR-DG710 DCDC DIGITAL 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R4001 1-216-817-11 METAL CHIP 1/10W C1304 1-107-726-11 CERAMIC CHIP 0.01uF R4002 1-216-819-11 METAL CHIP 1/10W C1305 1-100-566-11 CERAMIC CHIP 0.1uF...
  • Page 70 STR-DG710 DIGITAL 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C1495 1-162-960-11 CERAMIC CHIP 220PF C1970 1-162-964-11 CERAMIC CHIP 0.001uF C1501 1-100-566-11 CERAMIC CHIP 0.1uF C1971 1-162-964-11 CERAMIC CHIP 0.001uF...
  • Page 71 8-759-595-15 IC TC74ACT153F(EL) R1014 1-216-809-11 METAL CHIP 1/10W IC1303 8-759-096-87 IC TC7WU04FU(TE12R) R1015 1-216-809-11 METAL CHIP 1/10W IC1351 6-600-466-01 IC TORX147L(SONY) (DIGITAL R1035 1-216-825-11 METAL CHIP 2.2K 1/10W VIDEO 1 IN (OPTICAL)) R1039 1-216-833-11 METAL CHIP 1/10W IC1354 6-600-466-01 IC TORX147L(SONY) (DIGITAL...
  • Page 72 STR-DG710 DIGITAL 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R1153 1-216-809-11 METAL CHIP 1/10W R1351 1-216-809-11 METAL CHIP 1/10W R1154 1-216-809-11 METAL CHIP 1/10W R1352 1-216-821-11 METAL CHIP 1/10W...
  • Page 73 STR-DG710 DIGITAL DISPLAY 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R1511 1-216-833-11 METAL CHIP 1/10W R1964 1-216-864-11 SHORT CHIP R1512 1-216-857-11 METAL CHIP 1/10W R1513 1-216-833-11 METAL CHIP 1/10W <...
  • Page 74 STR-DG710 DISPLAY HDMI RE 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R106 1-249-419-11 CARBON 1.5K 1/4W C3518 1-107-826-11 CERAMIC CHIP 0.1uF R107 1-249-421-11 CARBON 2.2K 1/4W C3519 1-126-210-21 ELECT CHIP...
  • Page 75 STR-DG710 HDMI RE 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C3591 1-107-826-11 CERAMIC CHIP 0.1uF IC3503 6-710-819-01 IC TMDS341APFCR C3593 1-128-994-21 ELECT CHIP 47uF IC3504 8-759-596-39 IC SN74LV4052APWR C3594...
  • Page 76 STR-DG710 HDMI RE HEADPHONE 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R3570 1-216-809-11 METAL CHIP 1/10W R3711 1-216-829-11 METAL CHIP 4.7K 1/10W R3576 1-216-805-11 METAL CHIP 1/10W R3712 1-216-837-11 METAL CHIP...
  • Page 77 STR-DG710 MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-1224-702-A MAIN BOARD, COMPLETE (US,CND) C610 1-126-947-11 ELECT 47uF A-1224-704-A MAIN BOARD, COMPLETE (AEP,UK,AUS) C611 1-136-157-00 FILM 0.022uF A-1224-705-A MAIN BOARD, COMPLETE (MY,SP)
  • Page 78 STR-DG710 MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C802 1-126-947-11 ELECT 47uF CC55 1-162-927-11 CERAMIC CHIP 100PF C803 1-109-932-14 ELECT(BLOCK) 0.01F (AEP,UK,AUS) (US,CND) CC56 1-162-927-11 CERAMIC CHIP 100PF...
  • Page 79 STR-DG710 MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark IC801 8-759-071-48 IC TA7807S Q756 8-729-216-31 TRANSISTOR 2SA1163-G IC802 8-759-071-47 IC TA79007S Q790 8-729-620-07 TRANSISTOR 2SC3052EF-T1-LEF IC3002 8-759-710-97 IC NJM4565M-D...
  • Page 80 STR-DG710 MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R537 1-249-393-11 CARBON 1/4W F R663 1-216-818-11 METAL CHIP 1/10W R540 1-216-837-11 METAL CHIP 1/10W R664 1-249-399-11 CARBON 1/4W F...
  • Page 81 STR-DG710 MAIN POWER KEY STANDBY 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R750 1-216-837-11 METAL CHIP 1/10W < RELAY > R751 1-216-821-11 METAL CHIP 1/10W R752 1-216-843-11 METAL CHIP...
  • Page 82 STR-DG710 STANDBY VIDEO 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C952 1-126-942-61 ELECT 1000uF VIDEO BOARD C954 1-128-547-11 ELECT 6800uF ************ < CONNECTOR > < CAPACITOR > * CNP802 1-564-509-11 PLUG, CONNECTOR 6P...
  • Page 83 STR-DG710 VIDEO VIDEO 3 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R201 1-247-804-11 CARBON 1/4W C115 1-216-864-11 SHORT CHIP R218 1-247-804-11 CARBON 1/4W C116 1-107-826-11 CERAMIC CHIP 0.1uF R219...
  • Page 84 STR-DG710 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark IC102 6-709-251-01 IC F2602E-01-TR R154 1-216-809-11 METAL CHIP 1/10W IC104 8-759-710-97 IC NJM4565M-D R156 1-216-811-11 METAL CHIP 1/10W IC105 6-707-111-01 IC PCM1753DBQR...
  • Page 85 STR-DG710 3 7 63 1515 0 Ref. No. Part No. Description Remark ACCESSORIES ************ 1-480-098-11 STANDARD COMMANDER (RM-AAU014) (including BATTERY LID) (US,CND) 1-480-099-11 STANDARD COMMANDER (RM-AAU015) (including BATTERY LID) (EXCEPT US,CND) 1-501-374-12 ANTENNA, LOOP (AM) 1-501-807-12 ANTENNA (FM) (EXCEPT US,CND)
  • Page 86 STR-DG710 3 7 63 1515 0 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper on the revised page allows you to jump to the next revised page.

Table of Contents