hit counter script
Lenovo Ideapad 300-14IBR Hardware Maintenance Manual
  1. Manuals
  2. Brands
  3. Lenovo Manuals
  4. Laptop
  5. Ideapad 300-14IBR
  6. Hardware maintenance manual

Lenovo Ideapad 300-14IBR Hardware Maintenance Manual

Hide thumbs Also See for Ideapad 300-14IBR:
Table of Contents

Advertisement

Quick Links

See also: User Manual
Lenovo Ideapad 300-14IBR/
Ideapad 300-15IBR
Hardware
Maintenance
Manual

Advertisement

Table of Contents
loading

Related Manuals for Lenovo Ideapad 300-14IBR

Summary of Contents for Lenovo Ideapad 300-14IBR

  • Page 1 Lenovo Ideapad 300-14IBR/ Ideapad 300-15IBR Hardware Maintenance Manual...
  • Page 2 • Before using this information and the product it supports, be sure to read the general information under “Notices” on page 86. • This manual applies to the following models: Lenovo Ideapad 300-14IBR/Ideapad 300-15IBR. The illustrations used in this manual are for Lenovo Ideapad 300-15IBR unless otherwise stated.

  • Page 3: Table Of Contents

    Power-on password ..........24 Hard-disk password ..........24 Administrator password ........24 Power management ........25 Screen blank state ..........25 Putting the computer to sleep or shutting it down ..........25 Putting your computer to sleep ......25 Shutting down the computer ......25 Lenovo Ideapad 300-14IBR/ Ideapad 300-15IBR........26 Specifications ..........26 Status indicators ........... 28 Hotkeys............29 FRU replacement notices ......30 Screw notices ..........30 Removing and replacing an FRU ....31 1010 Base cover ..........33...

  • Page 4: About This Manual

    • The product-specific section includes service, reference, and product-specific parts information. Important: This manual is intended only for trained servicers who are familiar with Lenovo products. Use this manual to troubleshoot problems effectively. Before servicing a Lenovo product, make sure to read all the information under “Safety information” on page 1 and “Important service information” on page 16.

  • Page 5: Safety Information

    Safety information Safety information This chapter presents the following safety information that you need to get familiar with before you service a Lenovo Ideapad 300-14IBR/Ideapad 300-15IBR computer: • “General safety” on page 2 • “Electrical safety” on page 3 • “Safety inspection guide” on page 5 • “Handling devices that are sensitive to electrostatic discharge” on page 6 • “Grounding requirements” on page 6 • “Safety notices: multilingual translations” on page 7 • “Laser compliance statement” on page 14...

  • Page 6: General Safety

    Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual General safety Follow these rules below to ensure general safety: • Observe a good housekeeping in the area where the machines are put during and after the maintenance. • When lifting any heavy object: 1. Make sure that you can stand safely without slipping. 2. Distribute the weight of the object equally between your feet. 3. Use a slow lifting force. Never move suddenly or twist when you attempt to lift it. 4. Lift it by standing or pushing up with your leg muscles; this action could avoid the strain from the muscles in your back. Do not attempt to lift any object that weighs more than 16 kg (35 lb) or that you think is too heavy for you. • Do not perform any action that causes hazards to the customer, or that makes the machine unsafe.

  • Page 7: Electrical Safety

    Safety information Electrical safety Observe the following rules when working on electrical equipments. Important: Use only approved tools and test equipments. Some hand tools have handles covered with a soft material that does not insulate you when working with live electrical currents. Many customers have rubber floor mats near their machines that contain small conductive fibers to decrease electrostatic discharges.
  • Page 8 Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual • Always look carefully for possible hazards in your work area. Examples of these hazards are moist floors, nongrounded power extension cables, power surges, and missing safety grounds. • Do not touch live electrical circuits with the reflective surface of a plastic dental mirror. The surface is conductive; such touching can cause personal injury and machine damage. • Do not service the following parts with the power on when they are removed from their normal operating places in a machine: – Power supply units – Pumps – Blowers and fans – Motor generators and similar units. (This practice ensures correct grounding of the units.) • If an electrical accident occurs: – Caution: do not become a victim yourself.

  • Page 9: Safety Inspection Guide

    The power cord should be the type specified in the parts list. c. Insulation must not be frayed or worn. 4. Check for cracked or bulging batteries. 5. Remove the cover. 6. Check for any obvious non-Lenovo alterations. Use good judgment as to the safety of any non-Lenovo alterations. 7. Check inside the unit for any obvious unsafe conditions, such as metal filings, contamination, water or other liquids, or signs of fire or smoke damage. 8. Check for worn, frayed, or pinched cables.

  • Page 10: Handling Devices That Are Sensitive To Electrostatic Discharge

    Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual Handling devices that are sensitive to electrostatic discharge Any computer part containing transistors or integrated circuits (ICs) should be considered sensitive to electrostatic discharge (ESD). ESD damage can occur when there is a difference in charge between objects. Protect against ESD damage by equalizing the charge so that the machine, the part, the work mat, and the person handling the part are all at the same charge. Notes: 1. Use product-specific ESD procedures when they exceed the requirements noted here.

  • Page 11: Safety Notices: Multilingual Translations

    Safety information Safety notices: multilingual translations The safety notices in this section are provided in English, French, German, Hebrew, Italian, Japanese, and Spanish. Safety notice 1 Before the computer is powered on after FRU replacement, make sure all screws, springs, and other small parts are in place and are not left loose inside the computer.
  • Page 12 Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual Safety notice 2 DANGER Some standby batteries contain a small amount of nickel and cadmium. Do not disassemble a standby battery, recharge it, throw it into fire or water, or short- circuit it. Dispose of the battery as required by local ordinances or regulations.
  • Page 13 Safety information Safety notice 3 DANGER The battery pack contains small amounts of nickel. Do not disassemble it, throw it into fire or water, or short-circuit it. Dispose of the battery pack as required by local ordinances or regulations. Use only the battery in the appropriate parts listing when replacing the battery pack.
  • Page 14 Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual Safety notice 4 DANGER The lithium battery can cause a fire, an explosion, or a severe burn. Do not recharge it, remove its polarized connector, disassemble it, heat it above 100°C (212°F), incinerate it, or expose its cell contents to water. Dispose of the battery as required by local ordinances or regulations.
  • Page 15 Safety information Safety notice 5 If the LCD breaks and the fluid from inside the LCD gets into your eyes or on your hands, immediately wash the affected areas with water at least for 15 minutes. Seek medical care if any symptoms caused by the fluid are present after washing. Si le panneau d’affichage à...
  • Page 16 Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual Safety notice 6 DANGER To avoid shock, do not remove the plastic cover that protects the lower part of the inverter card. Afin d’éviter tout risque de choc électrique, ne retirez pas le cache en plastique protégeant la partie inférieure de la carte d’alimentation.
  • Page 17 Safety information Safety notice 8 DANGER Before removing any FRU, turn off the computer, unplug all power cords from electrical outlets, remove the battery pack, and then disconnect any interconnecting cables. Avant de retirer une unité remplaçable en clientèle, mettez le système hors tension, débranchez tous les cordons d’alimentation des socles de prise de courant, retirez la batterie et déconnectez tous les cordons d’interface.

  • Page 18: Laser Compliance Statement

    Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual Laser compliance statement Some models of Lenovo computer are equipped from the factory with an optical storage device such as a CD-ROM drive or a DVD-ROM drive. Such devices are also sold separately as options. If one of these drives is installed, it is certified in the U.S. to conform to the requirements of the Department of Health and Human Services 21 Code of Federal Regulations (DHHS 21 CFR) Subchapter J for Class 1 laser products. Elsewhere, the drive is certified to conform to the requirements of the International Electrotechnical Commission (IEC) 825 and CENELEC EN 60 825 for Class 1 laser products.
  • Page 19 Safety information A CD-ROM drive, a DVD-ROM drive, or any other storage device installed may contain an embedded Class 3A or Class 3B laser diode. Note the following: DANGER Emits visible and invisible laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam. Radiação por raio laser ao abrir. Não olhe fixo no feixe de luz, não olhe diretamente por meio de instrumentos óticos e evite exposição direta com o feixe de luz.

  • Page 20: Important Service Information

    Strategy for replacing FRUs Before replacing parts: Make sure that all software fixes, drivers, and BIOS downloads are installed before replacing any FRUs listed in this manual. After a system board is replaced, ensure that the latest BIOS is loaded to the system board before completing the service action. To download software fixes, drivers, and BIOS, follow the steps below: 1. Go to http://support.lenovo.com. 2. Enter the serial number or select a product or use Lenovo smart downloading. 3. Select the BIOS/Driver/Applications and download. 4. Follow the directions on the screen and install the necessary software.

  • Page 21: Strategy For Replacing A Hard Disk Drive

    Important service information Use the following strategy to prevent unnecessary expense for replacing and servicing FRUs: • If you are instructed to replace an FRU, but the replacement does not solve the problem, reinstall the original FRU before you continue. • Some computers have both a processor board and a system board. If you are instructed to replace either of them, and replacing one of them does not solve the problem, reinstall that board, and then replace the other one. • If an adapter or a device consists of more than one FRU, any of the FRUs may be the cause of the error. Before replacing the adapter or device, remove the FRUs one by one to see if the symptoms change. Replace only the FRU that changed the symptoms. Attention: The setup configuration on the computer you are servicing may have been customized. Running Automatic Configuration may alter the settings. Note the current configuration settings (using the View Configuration option); then, when service has been completed, verify that those settings remain in effect.

  • Page 22: Important Information About Replacing Rohs Compliant Frus

    Electronic Equipment Directive (2002/95/EC) is a European Union legal requirement affecting the global electronics industry. RoHS requirements must be implemented on Lenovo products placed on the market after June 2006. Products on the market before June 2006 are not required to have RoHS compliant parts.

  • Page 23: General Checkout

    General checkout General checkout This chapter presents the following information: • “What to do first” on page 20 • “Power system checkout” on page 21 Before you go to the checkout, make sure to read the following important notes: Important notes: • Only certified trained personnel can service the computer. • Before replacing any FRU, read the entire page on removing and replacing FRUs. • Carefully remove screws for reuse when replacing FRUs. • Be extremely careful during such write operations as copying, saving, or formatting. Drives in the computer that you are servicing sequence might have been altered.

  • Page 24: What To Do First

    Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual What to do first When you do return an FRU, you must include the following information in the parts exchange form or parts return form that you attach to it: 1. Name and phone number of servicer 2. Date of service 3. Date on which the machine failed 4. Date of purchase 5. Procedure index and page number in which the failing FRU was detected 6. Failing FRU name and part number 7. Machine type, model number, and serial number 8. Customer’s name and address Note for warranty: During the warranty period, the customer may be responsible for repair costs if the computer damage was caused by misuse, accident, modification, unsuitable physical or operating environment, or improper maintenance by the customer.

  • Page 25: Power System Checkout

    • If the computer does not charge during operation, go to “Checking operational charging”. To check the AC adapter, follow the steps below: 1. Unplug the AC adapter cable from the computer. 2. Measure the output voltage at the plug of the AC adapter cable. See the following figure: Voltage (V DC) Note: Output voltage for the AC adapter pin No. 2 may differ from the one you are servicing. 3. If the voltage is not correct, replace the AC adapter. 4. If the voltage is acceptable, do the following: • Replace the system board. • If the problem persists, go to “Lenovo Ideapad 300-14IBR/Ideapad 300-15IBR” on page 26. Note: Noise from the AC adapter does not always indicate a defect. Checking operational charging To check whether the battery charges properly during operation, use a discharged battery pack or a battery pack that has less than 50% of the total power remaining when installed in the computer.

  • Page 26: Checking The Battery Pack

    Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual Perform operational charging. If the battery status indicator or icon does not light on, remove the battery pack and let it return to room temperature. Reinstall the battery pack. If the charge indicator or icon is still off, replace the battery pack. If the charge indicator still does not light on, replace the system board. Then reinstall the battery pack. If it is still not charged, go to the next section. Checking the battery pack Battery charging does not start until the Power Meter shows that less than 95% of the total power remains; under this condition the battery pack can charge to 100% of its capacity. This protects the battery pack from being overcharged or from having a shortened life. To check your battery, move your cursor to the Power Meter icon in the icon ® tray of the Windows taskbar and wait for a moment (but do not click it), and the percentage of battery power remaining is displayed. To get detailed information about the battery, double-click the Power Meter icon. Note: If the battery pack becomes hot, it may not be able to be charged.

  • Page 27: Related Service Information

    System and run System Recovery. For details of OneKey Recovery System, see the User Guide for Lenovo OneKey Recovery system . Note: This will delete all the new data on the system partition (C drive), which is not recoverable. Make sure to back up your critical data before you perform this action.

  • Page 28: Passwords

    Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual Passwords As many as three passwords may be needed for any Lenovo computer: the power-on password (POP), the hard disk password (HDP), and the administrator password. If any of these passwords has been set, a prompt for it appears on the screen whenever the computer is turned on. The computer does not start until the password is entered.

  • Page 29: Power Management

    Related service information Power management Note: Power management modes are not supported for APM operating system. To reduce power consumption, the computer has three power management modes: screen blank, sleep (standby), and hibernation. Screen blank state If the time set on the “Turn off monitor” timer in the operating system expires, the LCD backlight turns off. You can also turn off the LCD backlight by pressing To end screen blank state and resume normal operation, press any key on the keyboard Putting the computer to sleep or shutting it down When you have finished working with your computer, you can put it to sleep or shut it down.

  • Page 30: Lenovo Ideapad 300-14Ibr/Ideapad 300-15Ibr

    Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual Lenovo Ideapad 300-14IBR/Ideapad 300-15IBR This chapter presents the following product-specific service references and product-specific parts information: • “Specifications” on page 26 • “Status indicators” on page 28 • “Hotkeys” on page 29 • “FRU replacement notices” on page 30 • “Removing and replacing an FRU” on page 31 • “Locations” on page 67 • “Parts list” on page 70 Specifications The following table lists the specifications of the Lenovo Ideapad 300-14IBR/ Ideapad 300-15IBR: Table 1. Specifications...
  • Page 31 Lenovo Ideapad 300-14IBR/Ideapad 300-15IBR Table 1. Specifications (continued) Feature Description Ethernet (on the • 1,000 Mbps system board) Bluetooth • Combined in combo card wireless Keyboard • 6 rows Lenovo Keyboard Touchpad • Multi-touch type Integrated • HD (720p) / 0.3 M camera Battery • 4 cell, 32 Wh / 41 Wh AC adapter • 20 V, DIS 65 W, UMA 45 W Pre-installed • Win 10 64 bits operating • Free-DOS/Linpus system • Win 8.1 64 bits(only for Braswell)

  • Page 32: Status Indicators

    Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual Status indicators The system status indicators below show the computer status: Table 2. Status indicators Indicator Charge Indicator Meaning status status On (solid white) The computer is powered on. Blinking The computer is in sleep mode. Power The computer is powered off. The battery has more than 80% Charging charge. On (solid white) The battery has more than 20% Discharging charge. The battery has between 5% and On (solid amber) Discharging 20% charge. The battery has between 20% and 80% charge. When the Blinking slowly battery reaches 80% charge, the...

  • Page 33: Hotkeys

    Lenovo Ideapad 300-14IBR/Ideapad 300-15IBR Hotkeys You can access certain system settings quickly by pressing the appropriate hotkeys. Table 3. Hotkeys Mutes/unmutes the sound. Decreases the volume level. Increases the volume level. Closes the currently active window. Refreshes the desktop or the currently active window. Enables/disables the touchpad. Enables/disables Airplane mode. Displays all currently active apps. Turns on/off the backlight of the LCD screen. Toggles the display between the computer and an external device. Decreases display brightness. Increases display brightness.

  • Page 34: Fru Replacement Notices

    Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual FRU replacement notices This section presents notices related to removing and replacing parts. Read this section carefully before replacing any FRU. Screw notices Loose screws can cause a reliability problem. In the Lenovo computer, this problem is addressed with special nylon-coated screws that have the following characteristics: • They maintain tight connections. • They do not easily come loose, even with shock or vibration.

  • Page 35: Removing And Replacing An Fru

    Attention: The system board is sensitive to, and can be damaged by, electrostatic discharge. Before touching it, establish personal grounding by touching a ground point with one hand or using an electrostatic discharge (ESD) strap (P/N 6405959) to remove potential shock reasons. Notes: • The following procedures about removing and replacing FRUs are the same for the Lenovo Ideapad 300-14IBR/Ideapad 300-15IBR. • The illustrations used in this section are of the Lenovo Ideapad 300-15IBR, unless otherwise stated.
  • Page 36 Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual CAUTION: Set the built-in battery in Ship Mode before replacing a CRU or sending your computer for service. 1. Turn off the computer and disconnect the AC adapter. 2. Press Fn + S + V. 3. Press the Power button to verify if Ship Mode has been set. Note: When set in Ship Mode, the battery does not supply power to the computer.

  • Page 37: 1010 Base Cover

    Lenovo Ideapad 300-14IBR/Ideapad 300-15IBR 1010 Base cover Figure 1. Removal steps of base cover Remove the screws 1. Then remove the base cover 2. Step Screw (quantity) Color Torque M2.5 × 6 mm, Phillips-head, nylok-coated (2) Black 2.5 ~ 3.0 kgf*cm...
  • Page 38 Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual Note: Applying labels to the base cover The new base cover FRU is shipped with a kit containing labels of several kinds. When you replace the base cover, you need to apply the following label: The following labels need to be peeled off from the old base cover and put on the new base cover. WL/BT label KCC label Indonesia label Rating label Rating print label OS label For some models, you also need to apply one or two FCC labels. Check the old base cover; if it has one or two FCC labels, find duplicates of them in the label kit and apply them to the new base cover. For the location of each label, refer to the following figures:...

  • Page 39: 1020 Hard Disk Drive

    Lenovo Ideapad 300-14IBR/Ideapad 300-15IBR 1020 Hard disk drive For access, remove this FRU: • “1010 Base cover” on page 33 Attention: • Do not drop the hard disk drive or apply any physical shock to it. The hard disk drive is sensitive to physical shock. Improper handling can cause damage and permanent loss of data. • Before removing the drive, suggest the customer to backup all the information on it if possible.
  • Page 40 Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual Figure 2. Removal steps of hard disk drive (continued) Ideapad 300-15IBR Step Screw (quantity) Color Torque M2 × 6 mm, Phillips-head, nylok-coated (3) Black 1.5 ~ 2.0 kgf*cm HDD BRK + D/C (Ideapad 300-14IBR) M2 × 6 mm, Phillips-head, nylok-coated (4) Black 1.5 ~ 2.0 kgf*cm...

  • Page 41: 1030 Pci Express Mini Card For Wireless Lan

    For access, remove this FRU: • “1010 Base cover” on page 33 Important: The preinstalled WLAN module may only be replaced with a Lenovo approved module in order to comply with FCC and IC regulations. Refer to “Table 4. Parts list—Overall” on page 73 for Lenovo part numbers for the approved modules. Figure 3. Removal steps of PCI Express Mini Card for wireless LAN Disconnect the two wireless LAN cables (black, grey) 1, and then remove the screw 2.
  • Page 42 Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual Figure 3. Removal steps of PCI Express Mini Card for wireless LAN (continued) Remove the card in the direction shown by arrow 3. When installing: • In models with a wireless LAN card that has two antenna connectors, plug the black cable (1st) (MAIN) into the jack labeled MAIN, and the grey cable (2nd) (AUX) into the jack labeled AUX on the card. • In models with a wireless LAN card that has three antenna connectors, plug the black cable (1st) (MAIN) into the jack labeled 1, the grey cable (3rd) into the jack labeled 3, and the white cable (2nd) (AUX) into the jack labeled 2 on the card.

  • Page 43: 1040 Dimm

    Lenovo Ideapad 300-14IBR/Ideapad 300-15IBR 1040 DIMM For access, remove this FRU: • “1010 Base cover” on page 33 Figure 4. Removal steps of DIMM Release the two latches on both edges of the socket at the same time in the directions shown by arrows 1, and then unplug the DIMM in the direction shown by arrow 2. When installing: Insert the notched end of the DIMM into the socket. Push the DIMM firmly, and pivot it until it snaps into place. Make sure that it is firmly fixed in the slot and is difficult to move. Note: When replacing the memory is completed, you need to restart the computer after the first reboot.

  • Page 44: 1050 Keyboard

    Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual 1050 Keyboard Figure 5. Removal steps of keyboard Remove the screws 1. Step Screw (quantity) Color Torque M2 × 6 mm, Phillips-head, nylok-coated (3) Black 1.5 ~ 2.0 kgf*cm KB + D Loosen the keyboard with a prying tool.
  • Page 45 Lenovo Ideapad 300-14IBR/Ideapad 300-15IBR Figure 5. Removal steps of keyboard (continued) Lift the keyboard slightly 4. Detach the connectors in the directions shown by arrows 5 and 6. Then remove the keyboard. When installing: Make sure that the FPC connector is attached firmly.

  • Page 46: 1060 Optical Disc Drive

    Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual 1060 Optical disc drive For access, remove this FRU: • “1050 Keyboard” on page 40 Figure 6. Removal steps of optical disc drive Remove the screw 1. Pull the optical drive out in the direction shown by arrow 2. Step Screw (quantity) Color Torque M2 × 6 mm, Phillips-head, nylok-coated (1)
  • Page 47 Lenovo Ideapad 300-14IBR/Ideapad 300-15IBR Figure 6. Removal steps of optical disc drive (continued) Remove the screw 3, then remove the optical drive bracket in the direction shown by arrow 4. Carefully remove the optical drive bezel in the direction shown by arrow 5. Step...

  • Page 48: 1070 Keyboard Bezel

    Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual 1070 Keyboard bezel For access, remove these FRUs in order: • “1010 Base cover” on page 33 • “1020 Hard disk drive” on page 35 • “1030 PCI Express Mini Card for wireless LAN” on page 37 • “1050 Keyboard” on page 40 • “1060 Optical disc drive” on page 42 Figure 7. Removal steps of keyboard bezel Disconnect the touchpad cable connector and the power board connector in the directions shown by arrows 1 and 2. Then remove the screw 3. Step Screw (quantity) Color Torque M2 × 6 mm, Phillips-head, nylok-coated (1) Black 1.5 ~ 2.0 kgf*cm C+MB+FAN+D...
  • Page 49 Lenovo Ideapad 300-14IBR/Ideapad 300-15IBR Figure 7. Removal steps of keyboard bezel (continued) Remove the screws 4 and 5. Step Screw (quantity) Color Torque M2 × 6 mm, Phillips-head, nylok-coated (5) Black 1.5 ~ 2.0 kgf*cm M2.5 × 6 mm, Phillips-head, nylok-coated (2) Black 2.5 ~ 3.0 kgf*cm Separate the keyboard bezel and uppercase in the directions shown by arrows 6 and 7.
  • Page 50 Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual Figure 7. Removal steps of keyboard bezel (continued) Remove the keyboard bezel in the direction shown by arrow 8. Remove the screw 9. Carefully remove the power board in the direction shown by arrow j. Step Screw (quantity) Color Torque M2 × 3 mm, Phillips-head, nylok-coated (1) Black 1.5 ~ 2.0 kgf*cm Power BD+C...

  • Page 51: 1080 Odd Board (Ideapad 300-15Ibr)

    Lenovo Ideapad 300-14IBR/Ideapad 300-15IBR 1080 ODD board (Ideapad 300-15IBR) For access, remove these FRUs in order: • “1010 Base cover” on page 33 • “1020 Hard disk drive” on page 35 • “1030 PCI Express Mini Card for wireless LAN” on page 37 • “1050 Keyboard” on page 40 • “1060 Optical disc drive” on page 42 • “1070 Keyboard bezel” on page 44 Figure 8. Removal steps of ODD board (Ideapad 300-15IBR) Detach the ODD board connector in the directions shown by arrows 1 and 2. Remove the screw 3. Step Screw (quantity) Color Torque M2 × 3 mm, Phillips-head, nylok-coated (1) Black 1.5 ~ 2.0 kgf*cm...
  • Page 52 Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual Figure 8. Removal steps of ODD board (Ideapad 300-15IBR) (continued) Remove the ODD board 4.

  • Page 53: 1090 Usb & Audio Board

    Lenovo Ideapad 300-14IBR/Ideapad 300-15IBR 1090 USB & audio board For access, remove these FRUs in order: • “1010 Base cover” on page 33 • “1020 Hard disk drive” on page 35 • “1030 PCI Express Mini Card for wireless LAN” on page 37 • “1050 Keyboard” on page 40 • “1060 Optical disc drive” on page 42 • “1070 Keyboard bezel” on page 44 Figure 9. Removal steps of USB & audio board Detach the USB & audio board connector in the directions shown by arrows 1 and 2. Remove the screw 3. Step Screw (quantity) Color Torque M2 × 3 mm, Phillips-head, nylok-coated (1) Black 1.5 ~ 2.0 kgf*cm...
  • Page 54 Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual Figure 9. Removal steps of USB & audio board (continued) Remove the USB & audio board 4.

  • Page 55: 1100 System Board

    Lenovo Ideapad 300-14IBR/Ideapad 300-15IBR 1100 System board Important notices for handling the system board: When handling the system board, bear the following in mind. • Be careful not to drop the system board on a bench top that has a hard surface, such as metal, wood, or composite.
  • Page 56 Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual Figure 10. Removal steps of system board (continued) Ideapad 300-15IBR Step Screw (quantity) Color Torque M2 × 6 mm, Phillips-head, nylok-coated (1) Black 1.5 ~ 2.0 kgf*cm Fan + D M2 × 3 mm, Phillips-head, nylok-coated (2) Black 1.5 ~ 2.0 kgf*cm MB + D...
  • Page 57 Lenovo Ideapad 300-14IBR/Ideapad 300-15IBR Figure 10. Removal steps of system board (continued) Remove the system board in the direction shown by arrow 5. Turn the system board over, and then unplug the DC-in cable in the direction shown by arrow 6.

  • Page 58: 1110 Fan Assembly And Heat Sink Assembly

    Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual 1110 Fan assembly and Heat Sink assembly For access, remove these FRUs in order: • “1010 Base cover” on page 33 • “1020 Hard disk drive” on page 35 • “1030 PCI Express Mini Card for wireless LAN” on page 37 • “1050 Keyboard” on page 40 • “1060 Optical disc drive” on page 42 • “1070 Keyboard bezel” on page 44 • “1080 ODD board (Ideapad 300-15IBR)” on page 47 • “1090 USB & audio board” on page 49 • “1100 System board” on page 51 Figure 11. Removal steps of fan assembly and heat sink assembly Unplug the fan connector in the direction shown by arrow 1. Remove the...
  • Page 59 Lenovo Ideapad 300-14IBR/Ideapad 300-15IBR Figure 11. Removal steps of fan assembly and heat sink assembly (continued) Remove the screws 4. Then lift the heat sink assembly in the direction shown by arrow 5. Step Screw (quantity) Color Torque M2 × 3 mm, Phillips-head, nylok-coated (3) Black 1.5 ~ 2.0 kgf*cm thermal+MB When installing: Make sure that the connector is attached firmly. When installing: Before you attach the fan assembly to the computer, apply thermal grease, at an amount of 0.2 grams, to the part shown in the figure above. Either...

  • Page 60: 1120 Speakers

    Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual 1120 Speakers For access, remove these FRUs in order: • “1010 Base cover” on page 33 • “1020 Hard disk drive” on page 35 • “1030 PCI Express Mini Card for wireless LAN” on page 37 • “1050 Keyboard” on page 40 • “1060 Optical disc drive” on page 42 • “1070 Keyboard bezel” on page 44 • “1080 ODD board (Ideapad 300-15IBR)” on page 47 • “1090 USB & audio board” on page 49 • “1100 System board” on page 51 • “1110 Fan assembly and Heat Sink assembly” on page 54 Figure 12. Removal steps of speakers Remove the speakers in the direction shown by arrows 1. Ideapad 300-14IBR...
  • Page 61 Lenovo Ideapad 300-14IBR/Ideapad 300-15IBR Figure 12. Removal steps of speakers (continued) Ideapad 300-15IBR...

  • Page 62: 1130 Lcd Unit

    Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual 1130 LCD unit For access, remove these FRUs in order: • “1010 Base cover” on page 33 • “1020 Hard disk drive” on page 35 • “1030 PCI Express Mini Card for wireless LAN” on page 37 • “1050 Keyboard” on page 40 • “1060 Optical disc drive” on page 42 • “1070 Keyboard bezel” on page 44 • “1080 ODD board (Ideapad 300-15IBR)” on page 47 • “1090 USB & audio board” on page 49 • “1100 System board” on page 51 • “1110 Fan assembly and Heat Sink assembly” on page 54 • “1120 Speakers” on page 56 Figure 13. Removal steps of LCD unit Release the antenna cables from the cable guides and then remove the screws 1. Remove the LCD unit in the direction shown by arrow 2.
  • Page 63 Lenovo Ideapad 300-14IBR/Ideapad 300-15IBR Figure 13. Removal steps of LCD unit (continued) Ideapad 300-15IBR Step Screw (quantity) Color Torque M2.5 × 4 mm, Phillips-head, nylok-coated (4) Black 2.5 ~ 3.0 kgf*cm HINGE BASE+D cover When installing: • Route the antenna cables along the cable guides. As you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken. • Make sure that the LCD connector is attached firmly and that you do not pinch the antenna cables when you attach the LCD assembly. Route the...

  • Page 64: 1140 Battery Pack

    Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual 1140 Battery pack DANGER Only use the battery specified in the parts list for your computer. Any other battery could ignite or explode. For access, remove this FRU: • “1010 Base cover” on page 33 • “1020 Hard disk drive” on page 35 • “1030 PCI Express Mini Card for wireless LAN” on page 37 • “1050 Keyboard” on page 40 • “1060 Optical disc drive” on page 42 • “1070 Keyboard bezel” on page 44...
  • Page 65 Lenovo Ideapad 300-14IBR/Ideapad 300-15IBR Figure 14. Removal steps of battery pack (continued) Remove the battery pack in the direction shown by arrow 2. Step Screw (quantity) Color Torque M2 × 6 mm, Phillips-head, nylok-coated (2) Black 1.5 ~ 2.0 kgf*cm BATTERY+D...

  • Page 66: 1150 Lcd Front Bezel, Lcd Panel, And Hinges

    Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual 1150 LCD front bezel, LCD panel, and hinges For access, remove these FRUs in order: • “1010 Base cover” on page 33 • “1020 Hard disk drive” on page 35 • “1030 PCI Express Mini Card for wireless LAN” on page 37 • “1050 Keyboard” on page 40 • “1060 Optical disc drive” on page 42 • “1070 Keyboard bezel” on page 44 • “1080 ODD board (Ideapad 300-15IBR)” on page 47 • “1090 USB & audio board” on page 49 • “1100 System board” on page 51 • “1110 Fan assembly and Heat Sink assembly” on page 54 • “1120 Speakers” on page 56 • “1130 LCD unit” on page 58 Figure 15. Removal steps of LCD front bezel, LCD panel, and hinges...
  • Page 67 Lenovo Ideapad 300-14IBR/Ideapad 300-15IBR Figure 15. Removal steps of LCD front bezel, LCD panel, and hinges (continued) Remove the screws 2. Lift the LCD panel slightly 3. Peel off the adhesive tape and detach the connector in the direction shown by arrow 4.
  • Page 68 Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual Figure 15. Removal steps of LCD front bezel, LCD panel, and hinges (continued) Remove the screws 5. Ideapad 300-14IBR Ideapad 300-15IBR Step Screw (quantity) Color Torque M2.5 × 3.5 mm, Phillips-head, nylok-coated (6) Silver 2.5 ~ 3.0 kgf*cm Hinge L & R + Cover...
  • Page 69 Lenovo Ideapad 300-14IBR/Ideapad 300-15IBR Figure 15. Removal steps of LCD front bezel, LCD panel, and hinges (continued) Then release the hinges in the direction shown by arrows 6.

  • Page 70: 1160 Camera Board

    Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual 1160 Camera board For access, remove these FRUs in order: • “1010 Base cover” on page 33 • “1020 Hard disk drive” on page 35 • “1030 PCI Express Mini Card for wireless LAN” on page 37 • “1050 Keyboard” on page 40 • “1060 Optical disc drive” on page 42 • “1070 Keyboard bezel” on page 44 • “1080 ODD board (Ideapad 300-15IBR)” on page 47 • “1090 USB & audio board” on page 49 • “1100 System board” on page 51 • “1110 Fan assembly and Heat Sink assembly” on page 54 • “1120 Speakers” on page 56 • “1130 LCD unit” on page 58 • “1150 LCD front bezel, LCD panel, and hinges” on page 62 Figure 16. Removal steps of camera board Note: The integrated camera is stuck on the top center of the LCD cover.

  • Page 71: Locations

    Lenovo Ideapad 300-14IBR/Ideapad 300-15IBR Locations Front view and right-side view 1 Integrated camera 2 Built-in microphone 3 Wireless LAN antennas 4 Computer display 5 Power button 6 Touchpad 7 System status indicators Note: For the description of each indicator, see “Status indicators” on page 28. 8 Combo audio jack 9 USB port j Optical drive k Kensington lock slot Ideapad 300-14IBR...
  • Page 72 Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual Ideapad 300-15IBR...

  • Page 73: Bottom And Left-Side View

    Lenovo Ideapad 300-14IBR/Ideapad 300-15IBR Bottom and Left-side view 1 Speaker 2 Memory card slot 3 USB port 4 HDMI port 5 RJ-45 port 6 VGA port 7 Fan louvers 8 Novo button 9 AC power adapter jack Ideapad 300-14IBR Ideapad 300-15IBR...

  • Page 74: Parts List

    Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual Parts list This section presents the following service parts: • “Overall” on page 71 • “LCD FRUs” on page 75 • “Keyboard” on page 78 • “Miscellaneous parts” on page 82 • “AC adapters” on page 82 • “Screws” on page 82 • “Power cords” on page 83 Note: Each FRU is available for all types or models, unless specific types or models are specified.

  • Page 75: Overall

    Lenovo Ideapad 300-14IBR/Ideapad 300-15IBR Overall Ideapad 300-14IBR...
  • Page 76 Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual Ideapad 300-15IBR...
  • Page 77 Lenovo Ideapad 300-14IBR/Ideapad 300-15IBR Table 4. Parts list—Overall Ideapad Ideapad No. FRU FRU no. 300-14IBR 300-15IBR a-e See “Miscellaneous parts” on page 82. LCD unit (see “LCD FRUs” on page 75.) Keyboard (see “Keyboard” on page 78.) Upper Cover L 300-14IBR 5CB0K14009 ●...
  • Page 78 Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual Table 4. Parts list—Overall (continued) Ideapad Ideapad No. FRU FRU no. 300-14IBR 300-15IBR Hard disk drive, ST1000LM014 9.5mm 1T+8G 5H20H24607 ● ● Heatsink DIS L 300-IBR 5H40K14187 ● ● Heatsink UMA L 300-IBR 5H40K14186 ●...

  • Page 79: Lcd Frus

    Lenovo Ideapad 300-14IBR/Ideapad 300-15IBR LCD FRUs In Lenovo Ideapad 300-14IBR/Ideapad 300-15IBR, there are following types of LCDs. • “14.0-in. HD LED” • “15.6-in. HD LED” Ideapad 300-14IBR...
  • Page 80 Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual Ideapad 300-15IBR...
  • Page 81 Lenovo Ideapad 300-14IBR/Ideapad 300-15IBR Table 5. Parts list—LCD FRUs Ideapad Ideapad No. FRU FRU no. 300-14IBR 300-15IBR LCD BEZEL-TEX-300-14IBR 5B30K14014 ● LCD BEZEL-IMR-300-14IBR 5B30K14054 ● LCD BEZEL-TEX-300-15IBR 5B30K14031 ● LCD BEZEL-IMR-300-15IBR 5B30K14025 ● CMI N140BGE-EB3 C3 HD G S NB 5D10H13023 ● LG LP140WH8-TPG1 HDT G F NB 5D10H91344 ● AUO B140XTN02.D 2A HD G S NB 5D10H13021 ● SDC LTN140AT35-L01 HD G F NB 5D10H15254 ●...

  • Page 82: Keyboard

    Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual Keyboard Table 6. Parts list—Keyboard Ideapad Ideapad Language 300-14IBR 300-15IBR English 25214510 U.K. English 25214511 Italian 25214512 Spanish 25214513 Turkish 25214514 Thai 25214515 Portuguese 25214516 Latin 25214517 Canadian English&French 25214518 Korean 25214519 Traditional Chinese 25214520 Russian 25214521...
  • Page 83 Lenovo Ideapad 300-14IBR/Ideapad 300-15IBR Table 6. Parts list—Keyboard (continued) Ideapad Ideapad Language 300-14IBR 300-15IBR Japanese 25215206 Dutch 25215207 Greek 25215208 Hebrew 25215209 Hungarian 25215210 Four Nordic countries 25215211 Belgian 25215212 Liteon Icelandic 25215213 Slovenian 25215214 Swiss 25215215 International English 25215216 Czechoslovakian 25215217 Bulgarian...
  • Page 84 Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual Table 6. Parts list—Keyboard (continued) Ideapad Ideapad Language 300-14IBR 300-15IBR English 25214725 U.K. English 25214726 Italian 25214727 Spanish 25214728 Turkish 25214729 Thai 25214730 Portuguese 25214731 Latin 25214732 Canadian English&French 25214733 Korean 25214734 Traditional Chinese 25214735 Russian 25214736...
  • Page 85 Lenovo Ideapad 300-14IBR/Ideapad 300-15IBR Table 6. Parts list—Keyboard (continued) Ideapad Ideapad Language 300-14IBR 300-15IBR Japanese 25214771 Dutch 25214772 Greek 25214773 Hebrew 25214774 Hungarian 25214775 Four Nordic countries 25214776 Belgian 25214777 Sunrex Icelandic 25214778 Slovenian 25214779 Swiss 25214780 International English 25214781 Czechoslovakian 25214782 Bulgarian...

  • Page 86: Miscellaneous Parts

    Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual Miscellaneous parts Table 7. Parts list—Miscellaneous parts Ideapad Ideapad FRU no. 300-14IBR 300-15IBR System miscellaneous parts: • ( a ) HDD BRACKET L 300-IBR 5B40K14016 ● ● • ( b ) ODD BEZEL L 300-IBR 5B30K14037 ● ● • ( c ) ODD BRACKET L 300-IBR 5B40K14005 ●...

  • Page 87: Power Cords

    Lenovo Ideapad 300-14IBR/Ideapad 300-15IBR Power cords A Lenovo power cord for a specific country or region is usually available only in that country or region: Table 10. Parts list—power cords Ideapad Ideapad Region 300-14IBR 300-15IBR CCC 3PIN 145000600 • LINETEK PC323+RVV300/300+LS15 1m Argentina 3PIN 145000599 • LINETEK LS15+H03VV-F+LP39 1m Danmark 3PIN 145000598 • LINETEK LS15+H03VV-F+LP-38 1m Switzerland 3PIN 145000597 • LINETEK LS15+H03VV-F+LP-37 1m Brazil 3PIN 145000596 • LINETEK LS15 H03VV-F LP26A 1m Israel 3PIN 145000595 • LINETEK LS15+H03VV-F+LP-41 1m...
  • Page 88 Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual Table 10. Parts list—power cords (continued) Ideapad Ideapad Region 300-14IBR 300-15IBR Israel 3PIN 145000563 • Longwell LP-41+H03VV-F+LS-18 1m UL 3PIN 145000562 • Longwell LP-30B+SPT-2 18AWG+LS-18 1m UK 3PIN 145000561 • Longwell LP-61L+H03VV-F+LS-18 1m Indian 3PIN 145000560 • Longwell LP-67+BIS+LS-18 1m Italy 3PIN 145000559 • Longwell LP-22+H03VV-F+LS-18 1m Korea 3PIN 145000558 • Longwell LP-486+KTLH03VV-F+LS-5 1m...
  • Page 89 Lenovo Ideapad 300-14IBR/Ideapad 300-15IBR Table 10. Parts list—power cords (continued) Ideapad Ideapad Region 300-14IBR 300-15IBR Brazil 3PIN 145000527 • VOLEX CH10S3+H03VV-F+VAC5S 1m Israel 3PIN 145000526 • VOLEX SI16S3+H03VV-F+VAC5S 1m CE 3PIN 145000525 • VOLEX M2511+HO3VV-F+VAC5S 1m 145500000 • lux 0031+H03VV-F 0.75/3C+0011 1m Europe 145500001 • lux 0033+H03VV-F 0.75/3C+0011 1m 145500002 • lux 0014+SPT-2 60°C 18/3C+0016 1m Thailand 5L60J33143 • lux 0014+H03VV-F 0.75/3C+0011 1m...

  • Page 90: Notices

    Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead. However, it is the...

  • Page 91: Trademarks

    Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment. Trademarks The following terms are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. Lenovo OneKey Ideapad Microsoft and Windows are trademarks of Microsoft Corporation in the United States, other countries, or both.

This manual is also suitable for:

Ideapad 300-15ibr

Table of Contents