Security Function Notice; Security Function Disable; Resetting Procedure - Sanyo plc-wu3800 Service Manual
Hide thumbs
Also See for plc-wu3800:
- Owner's manual (85 pages) ,
- Manual (74 pages) ,
- Dimensional drawing (1 page)
Table of Contents
Advertisement
Security Function Notice
Security Function Disable
This projector provides security functions such as "Key lock", "PIN code lock" and "Logo PIN code lock".
When the projector has set these security function on, you are required to enter correct PIN code to use
the projector. If you do not know the correct PIN code to the projector, the projector can no longer be
operated or started. In this case, you must reset those function first according to the resetting procedure
described below and then check up on the projector.
Function
Key lock
PIN code lock
Logo PIN code lock
Resetting procedure
1. Disconnect the AC power cord from the AC outlet.
2. As pressing the SeLeCt button, connect the AC power cord into an AC outlet again.
3. Keep pressing the SeLeCt button and then press the ON/StANd-BY button.
4. Release the ON/StANd-BY button first and then release the SeLeCt button.
- The PIN code lock and Logo PIN code lock will be reset as the initial PIN code at the factory and
the key lock function is disabled.
Please refer to the owner's manual for further information of the security functions.
description
Locks operation of the top control or the remote con-
trol.
If the Key lock is enabled with top control lock, the
projector can no longer be started.
Initial setting: Key lock function is disabled.
Prevents the projector from being operated by an un-
authorized person.
Initial code: "1234"
Prevents an unauthorized person for changing the
start-up logo and captured image on the screen.
Initial code: "4321"
-11-
- Quick Links:
- Thermal Switch
Hide quick links:
Advertisement
Table of Contents
