Table of Contents
Advertisement
Electrical Adjustments
Group/
Item Name
Item
V-Line Shading Comp. Value
137
Setting [R5 dot]
V-Line Shading Comp. Value
138
Setting [R6 dot]
V-Line Shading Comp. Value
139
Setting [G1 dot]
140 V-Line Shading Comp. Value
Setting [G dot]
V-Line Shading Comp. Value
140
Setting [G3 dot]
V-Line Shading Comp. Value
14
Setting [G4 dot]
143 V-Line Shading Comp. Value
Setting [G5 dot]
V-Line Shading Comp. Value
144
Setting [G6 dot]
145 V-Line Shading Comp. Value
Setting [B1 dot]
146 V-Line Shading Comp. Value
Setting [B dot]
147 V-Line Shading Comp. Value
Setting [B3 dot]
148 V-Line Shading Comp. Value
Setting [B4 dot]
149 V-Line Shading Comp. Value
Setting [B5 dot]
150 V-Line Shading Comp. Value
Setting [B6 dot]
Group
Option
00
0 Logo Prohibition (Forced No
Brand)
1 RS3C Baudrate
PJLink Enable
3 Shipping Setting
4 CABLE SW
5 PW Debug Command Enable
6 Device Refresh Disable
7 Device Access Disable
0 Projector Time Reset
Lamp Warning Time
1
(NORMAL)
Lamp Warning Time (ECO)
3 Lamp Warning Time (HIGH)
30 Lamp life test enable
31 Lmap On time(for life test)
3 Lamp Off time(for life test)
33 Lamp total time(for life test)
40 PreScaler
41 Htime
5 Lamp Counter reset Times
54 Factory Default Execute Times Reset times of Fanctory Default
55 Motor Disable
56 Menu Position
57 Menu Position
60 Spread Spectrum Enable
61 Spread Spectrum Frequency
6 Spread Spectrum Amplitude
70 R/C Mode setting
Group
Option (signal)
01
0 FrameLock Option
Field Sense Invert Enable
Function
Normal-Mount / Rear-Ceiling
Normal-Mount / Rear-Ceiling
Normal-Mount / Rear-Ceiling
Normal-Mount / Rear-Ceiling
Normal-Mount / Rear-Ceiling
Normal-Mount / Rear-Ceiling
Normal-Mount / Rear-Ceiling
Normal-Mount / Rear-Ceiling
Normal-Mount / Rear-Ceiling
Normal-Mount / Rear-Ceiling
Normal-Mount / Rear-Ceiling
Normal-Mount / Rear-Ceiling
Normal-Mount / Rear-Ceiling
Normal-Mount / Rear-Ceiling
Logo Prohibition (0: Menu, 1: Forced, :
China, 3-9: not used)
Baud Rate
PJLink
Long Cable
Lamp Life at Normal Mode (Warning
Time at Normal)
Lamp Life at Eco Mode (Warning Time
at Eco)
Lamp Life at High Mode (Warning Time
at High)
For test purpose
For test purpose
For test purpose
Reset Times of Lamp Counter
0: On, 1: Off
Move menu (X asis)
Move menu (Y asis)
0 : Standard R/C Mode 1: Promethean
R/C mode
Initial
16 /16
16 /16
17 /17
16 /16
16 /16
16 /16
16 /16
16 /16
17 /17
16 /16
16 /16
16 /16
16 /16
16 /16
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
80
100
1
0
0
-34-
Range
Note
0 - 31
0 - 31
0 - 31
0 - 31
0 - 31
0 - 31
0 - 31
0 - 31
0 - 31
0 - 31
0 - 31
0 - 31
0 - 31
0 - 31
0 -
Effective after AC On
0: 1900bps, 1: 9600bps, :
0 -
11500bps
0 - 1
0:Disable 1:Enable
0 - 0
Default set when the value is set to 10
0 - 10
0: Disable, 1: Enable
0:Disable (Sanyo Serial Command
0 - 1
Eanble)
1: Enable (PW Debug Mode)
0:Enable, 1:Disable
0 - 1
No last memory
0:Enable (Normal), 1:Disable
0 - 1
No last memory
Projector Time is cleared when the
0 - 0
value is set to 10
500 - 8000
500 - 8000
500 - 8000
0:Disable 1:Enable, for safety test only
0-55
n/a
0-65535
n/a
0 - 55
Read only
0 - 55
Read only
0 - 1
0 - 104
0 - 104
0 - 1
0: Off, 1: On
0 - 500
0 - 300
0 - 1
0: FrameLockOFF at PC signal
1: FrameLockON at PC signal and 47Hz
0 - 1
(Vfreq) ~ Panel frequency of input
signal
Reverse Processing of FLDINVSetting
Value
0 - 1
0: Disable - Used FLDINV Setting Value
1: Enable - Used Reversed FLDINV
Setting Value
Hide quick links:
Advertisement
Table of Contents
