Table of Contents
Advertisement
Maintenance
1.
Lower the loader arms and stop the engine.
Remove the key.
2.
Close fuel shut-off valve on the filter (Fig. 20).
1
Figure 20
1. Filter
2. Fuel shut–off valve
3.
Unscrew the nut securing the bowl to the filter
head.
4.
Remove water or other contaminants from the
bowl.
28
3
2
3. Bleed screws
POTENTIAL HAZARD
Under certain conditions fuel is extremely
flammable and highly explosive.
WHAT CAN HAPPEN
A fire or explosion from fuel can burn you,
others, and cause property damage.
HOW TO AVOID THE HAZARD
Use a funnel and fill the fuel tank outdoors,
in an open area, when the engine is cold.
Wipe up any fuel that spills.
Do not fill the fuel tank completely full.
Add fuel to the fuel tank until the level is
1/4" to 1/2" (6 mm to 13 mm) below the
bottom of the filler neck. This empty space
in the tank allows fuel to expand.
Never smoke when handling fuel, and stay
away from an open flame or where fuel
fumes may be ignited by a spark.
Store fuel in an approved container and
keep it out of the reach of children. Never
buy more than a 30-day supply.
5.
Remove the fuel filter and replace it with a new
one.
6.
Install the bowl to the filter head.
7.
Ensure that the O-ring is positioned properly
between the bowl mounting nut and the filter
head.
8.
Open the fuel shut-off valve on on the filter.
9.
Open the bleed screws on filter mounting head to
fill the bowl with fuel (Fig. 20).
10. Close the bleed screws.
Bleeding the Fuel System
Bleeding of the fuel system is required in any of the
following conditions:
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
