Replacing The Fuel Filter - Toro 30632 Operator's Manual
Commercial walk-behind mower fixed deck, pistol grip, gear drive with 32in, 36in, or 48in cutting unit
Hide thumbs
Also See for 30632:
- Operator's manual (48 pages) ,
- Operator's manual (48 pages) ,
- Operator's manual (52 pages)
Table of Contents
Advertisement
Replacing the Fuel Filter
Service Interval: Every 200 hours/Yearly (whichever comes
first)
Never install a dirty filter if it is removed from the fuel line.
Note: Note how the fuel filter is installed in order to install
the new filter correctly.
Note: Wipe up any spilled fuel.
1. Disengage the PTO and set the parking brake.
2. Stop the engine, remove the key, and wait for all moving
parts to stop before leaving the operating position.
3. Close the fuel-shutoff valve at the fuel tank (Figure 31).
4. Squeeze the ends of the hose clamps together and slide
them away from the filter (Figure 32).
Figure 32
1. Hose clamp
2. Fuel line
5. Remove the filter from the fuel lines.
6. Install a new filter and move the hose clamps close to
the filter.
7. Open the fuel-shutoff valve at the fuel tank (Figure 31).
8. Check for fuel leaks, and repair if needed.
9. Wipe up any fuel that spilled.
Servicing the Fuel Vent System
Service Interval: Every 200 hours/Yearly (whichever comes
first)
1. Disengage the PTO and set the parking brake.
2. Stop the engine, remove the key, and wait for all moving
parts to stop before leaving the operating position.
3. Remove the existing fuel vent filter (Figure 33).
4. Install a new filter.
3. Filter
1 2
1. Fuel vent filter
28
g014686
Figure 33
2. Right side of engine
- Quick Links:
- Adjusting the Height of Cut
- Belt Maintenance
Hide quick links:
Advertisement
Table of Contents
