Advertisement
QuickSpecs
Technical Specifications
System Unit
Dimensions
(H x W x D)
Weight
(approximate)
Power Specifications
System Inlet
Temperature
Relative Humidity
(non-condensing)
Altitude
Acoustic Noise
DA - 13654 North America — Version 25 — December 4, 2012
HP ProLiant BL465c Generation 7 (G7) Server Blade
7.154 x 2.19 x 20.058 in (18.17 x 5.56 x 50.95 cm)
Maximum
(all hard drives, DIMMs, and
processors installed)
Minimum
(no hard drives, two
DIMMs, and one processor
installed)
For power specifications including Input Requirements, BTU Rating, and Power
Supply Output, please see the HP BladeSystem c-Class Enclosures QuickSpecs
located at URL:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_na/
12790_na.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_na/
12810_na.html
To review typical system power ratings use the HP Power Advisor which is
available via the online tool located at:
NOTE: For optimal cooling and system performance the BL465c G7 requires
the c7000 enclosure to be configured with 10 fans and the c3000 enclosure to
be configured with 6 fans.
Operating
Non-operating
Operating
Non-operating
Operating
Non-operating
For acoustic noise specifications, please see the HP BladeSystem c-Class
Enclosures QuickSpecs located at URL:
13.9 lb (6.3 kg)
9.8 lb (4.45 kg)
www.hp.com/go/hppoweradvisor
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m (1.8°F
per every 1000 ft) above sea level to a maximum
of 3050 m (10,000 ft), no direct sustained
sunlight. Maximum rate of change is 10°C/hr
(18°F/hr). The upper limit may be limited by the
type and number of options installed. System
performance may be reduced if operating with a
fan fault, or above 30°C (86°F).
-30° to 60°C (-22° to 140°F). Maximum rate of
change is 20°C/hr (36°F/hr).
10 to 90% relative humidity (Rh), 28°C (82.4°F)
maximum wet bulb temperature, non-
condensing.
5 to 95% relative humidity (Rh), 38.7°C (101.7°F)
maximum wet bulb temperature, non-
condensing.
3050 m (10,000 ft). This value may be limited by
the type and number of options installed.
Maximum allowable altitude change rate is 457
m/min (1500 ft/min).
Page 39
Advertisement
