Table of Contents
Advertisement
Hole
3. Remove the frothed milk regulator by pulling it outwards.
4. Wash all the components thoroughly with hot water and
mild washing-up liquid.
Make sure there are no milk residues left inside the holes
and the groove on the fine end of the frothed milk regula-
tor.
5. Check that the intake tube and spout are not clogged with
milk residues.
6. Replace the frothed milk regulator, milk spout and intake
tube.
7. Replace the milk container lid.
Cleaning the coffee jug
Clean the jug with a damp cloth and mild washing up liquid.
N.B.: To avoid damaging the appearance of the jug, do
not wash in a dishwasher.
CHANGING AND SETTING MENU
PARAMETERS
When the appliance is ready, you can use the internal menu to
modify the following parameters and functions:
•
Choose language
•
Rinsing
•
Shut-off time
•
Set clock
•
Start time
•
Auto-start
•
Temperature
•
Water hardness
•
Program coffee
•
Program cappuccino
•
Program jug
•
Program water
•
Descale
•
Reset to default
•
Statistics
•
Buzzer
•
Contrast
Setting the language
To change the language on the display, proceed as follows:
•
•
Hole
•
•
•
the menu directly to modify the parameter.
•
•
Rinsing
This function enables you to obtain hotter coffee.
Proceed as follows:
•
•
Changing the length of time the appliance
remains on
The appliance is set by default to go off automatically 30 minutes
after the last coffee has been made.
To change this interval (max. 120 min), proceed as follows:
•
•
•
•
14
Press the
icon (B2) to enter the menu. "CHOOSE LAN-
GUAGE" is displayed.
Press the OK icon (B9).
Press the
icons (B7) and (B8) until the required lan-
guage is displayed.
Press the OK icon (B9) to confirm.
Press the ESC (B6) to exit the menu.
N.B.: If you choose the wrong language, you can access
Press the
(B2) for at least 7 seconds until the appli-
ance displays the various languages.
Choose the required language as described in the section
"Using the appliance for the first time".
When you turn the appliance on, if you want to make a
small cup of coffee (less than 60 cc), preheat the cup by
rinsing it with hot water.
If on the other hand more than 2/3 minutes have passed
since the last coffee was made, before requesting another
coffee, you must preheat the brewing unit by first press-
ing the
icon (B2) to enter the menu then the
icons (B7) and (B8) to select the "RINSING" function. Press
the OK icon (B9).
"RINSING... PLEASE CONFIRM" is displayed.
Press the OK icon (B9) again.
Deliver the water into the underlying drip tray or alterna-
tively use this water to fill (and then empty) the cup to be
used for the coffee to preheat it.
Press the
icon (B2) to enter the menu and then the
icons (B7) and (B8) until "SHUT-OFF TIME" is dis-
played.
Press the OK icon (B9) to confirm.
Press the
icons (B7) and (B8) to set the time after
which the appliance will go off (after 1/2 hour, 1 hour, 2
hours).
Press the OK icon (B9) to confirm.
EN
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
