Related Manuals for Sony DWM-02N
Summary of Contents for Sony DWM-02N
- Page 1 4-585-174-01 (1) Digital Wireless Microphone Operating Instructions DWM-02N © 2015 Sony Corporation...
-
Page 2: Table Of Contents
Table of Contents Features ..............3 Parts Identification ........... 4 Power Supply ............. 5 Installing the Batteries ........... 5 Attaching the Supplied Accessories ......6 Replacing the Identification Ring ......6 Setting the Transmission Channel ......7 Selecting the Group/Channel ......... 7 Using the Cross Remote .......... -
Page 3: Features
DWM-02N. The capsule mounting area has design, and is intended for use in UHF synthesized wireless microphone systems. The DWM-02N can be used standard dimensions with a diameter of 31.3 mm and a... -
Page 4: Parts Identification
d Antenna cover Parts Identification Holds the antenna for RF transmission and wireless remote control function. e POWER indicator Lights up green when the microphone is turned on. When the battery is exhausted, the indicator starts flashing. f USB connector (Micro USB) Use this connector to connect an optional USB keyboard to Inside the grip... -
Page 5: Power Supply
• When BATTERY TYPE is set to TYPE1, the power status is indicated based on the use of new LR6 (size AA) Sony Alkaline batteries. An incorrect indication may result when a different kind of batteries, a different brand of batteries or old batteries are used. If you plan to... -
Page 6: Attaching The Supplied Accessories
• If you plan to use the microphone for a long period of Attaching the Supplied time, it is recommended that you replace the batteries with brand new ones. Accessories For details on BATTERY TYPE setting, see “Setting the Battery Type (BATTERY TYPE)” on page 13. Replacing the Identification Ring A black ring is attached at the factory. -
Page 7: Setting The Transmission Channel
Set the microphone group (GP) and channel (CH) as follows: For details on groups and channels, refer to “Sony Digital Wireless Microphone System Frequency Lists” on the supplied CD-ROM. For details on menu operation, see “Basic Menu Operations”... -
Page 8: Using The Cross Remote
When pairing has been established, the wireless Using the Cross Remote remote control condition level (indicated by goes up, RF REMOTE turns on, and the remote control function becomes operative. This microphone is equipped with a wireless remote When “Pairing fail” is displayed control function that can be used to set the parameters (low-cut filter, attenuation operation, power save mode, •... -
Page 9: Using The Encrypted Transmission Function
• When pairing fails (“Pairing fail” is displayed), Using the Encrypted successful communication between the microphone and the receiver has not occurred within a given amount of Transmission Function time. Pairing may be harder to do when another receiver is engaged in pairing nearby. •... -
Page 10: Using Password Mode (Password)
For details on receiver operations, refer to the Note operating instructions supplied with the receiver. When the receiver does not support encryption key exchange through USB connection, select REMOTE. Note For details on the receiver, refer to the operating It is recommended that you change the password instructions supplied with the receiver. -
Page 11: Using A Usb Keyboard
Using a USB Keyboard Basic Menu Operations Connecting an optional USB keyboard to the microphone Function name allows you to perform menu operations and enter your name and password for the encrypted transmission function from the keyboard. A Micro USB connector is used on the microphone. For this reason, use the supplied USB adapter cable. -
Page 12: Setting Menus
The maximum RF output power can be configured on the For details about the frequency range of each band, refer unit. to “Sony Digital Wireless Microphone System Frequency Lists” on the supplied CD-ROM. For details, see “Setting the maximum RF output power (MAX RF POWER)”... -
Page 13: Low-Cut Filter Setting (Lcf)
–46 –10 TYPE1: The power status is indicated based on –43 –7 characteristics of new LR6 (size AA) Sony Alkaline batteries. Select this for LR6 (size AA) alkaline batteries. 3 dB steps 3 dB steps 3 dB steps TYPE2: Select this for rechargeable nickel-metal-hydride –7... -
Page 14: Setting The Maximum Rf Output Power (Max Rf Power)
MODE2: Delay times are reduced in this audio codec Note mode. Audio quality is also improved when compared to If the microphone is turned off while the reference signal MODE1. We recommend using this mode under normal function is on, the function will turn off automatically. circumstances. -
Page 15: Automatic Dimming Of The Display (Dimmer Mode)
Automatic Dimming of the Display (DIMMER MODE) The organic light-emitting diode display can be set to dim or turn off after a certain amount of time. AUTO OFF: The display turns off after 30 seconds. The display goes on again when you press the SET, +, or – button. -
Page 16: Block Diagram
Block Diagram Microphone capsule Attenuator Digital signal processor Head amp. Low-cut filter High- A/D converter Audio codec frequency modulator circuit Internal SG... -
Page 17: Troubleshooting
If you encounter a problem using this microphone, use the following checklist to find a solution. For any problems with the receiver, refer to the operating instructions supplied with the receiver. If the problem persists, consult your Sony dealer. Symptom... -
Page 18: Important Notes On Operation
The use of portable telephones and other communication • The presence of the lighting equipment may produce devices near the DWM-02N may result in malfunction and electrical interference over the entire frequency range. interference with audio signals. It is recommended that... -
Page 19: Specifications
DIMMER ANY OTHER REASON WHATSOEVER. MODE set to AUTO OFF, and with • SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY the CU-C31 Sony capsule unit KIND MADE BY USERS OF THIS UNIT OR MADE BY mounted) THIRD PARTIES. -
Page 20: Carrier Frequencies And Channel Steps
Carrier Frequencies and Channel Steps Underlined items are the factory setting. US models Channel step: 25 kHz Group/channel Model No. Frequency band Frequency (factory setting) TV14-17 470.125 - 493.875 MHz U14 (TV14-25) TV18-21 494.125 - 517.875 MHz 00 1801 494.125 MHz TV22-25 518.125 - 541.875 MHz TV30-33... - Page 21 Sony Corporation...