Section
04
Basic Operations
2
Align the top of the front panel to the
unit.
3
Press the bottom of the front panel
until it is clicked.
Note
In the following cases, remove the front panel
and then attach it again:
! When nothing appears in the sub-display.
! When beep sounds.
Built-in DVD player basic
operations
Playing a disc
1
Press EJECT to open the front panel.
Disc loading slot appears.
# When a disc is loaded in this unit, touch the
source icon and then touch DVD to select DVD.
2
Insert a disc into the disc loading slot.
Front panel is closed automatically, and play-
back will start.
26
En
Disc loading slot
# When DVD DISC AUTO is off, touch the
source icon and then touch DVD to select the
built-in DVD player (refer to page 21).
# If you are playing a DVD or Video CD, a menu
may appear. Refer to Operating the DVD menu on
page 32 and PBC playback on page 37.
# When the automatic playback function is on,
this unit will cancel the DVD menu and automati-
cally start playback from the first chapter of the
first title. Refer to Automatic playback of DVDs on
page 35.
# You can eject a disc by pressing EJECT.
Notes
! The DVD player plays one, standard, 12-cm or
8-cm (single) disc at a time. Do not use an
adapter when playing 8-cm discs.
! Do not insert anything other than a disc into
the disc loading slot. Discs which can be
played back are listed on Playable discs on
page 8.
! If bookmark function is on, DVD playback re-
sumes from the selected point. For more de-
tails, refer to Resume playback (Bookmark) on
page 33.
! If a disc contains a mixture of various media
file types such as DivX and MP3, you can
switch between media file types to play. Refer
to Switching the media file type on the next
page.
! If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press EJECT to eject the disc, and check the
disc for damage before inserting it again.