Table of Contents
Advertisement
Hardware management and maintenance
The output depends on your router model and software version. For more information about the
commands used in this chapter, see HPE FlexNetwork HSR6800 Routers Command References.
Displaying the hardware information of the router
Displaying the version information of the router
Use the display version command to display software and hardware version information of the
router. The output includes the following information: the current software version and hardware
version, router operating time, type and operating time of each MPU and LPU.
<Sysname> display version
HPE Comware Software, Version 7.1.064, Release 7607
Copyright (c) 2010-2017 Hewlett Packard Enterprise Development LP
HPE HSR6802 uptime is 0 weeks, 0 days, 4 hours, 16 minutes
Last reboot reason : Power on
Boot image: cfa0:/HSR6800-CMW710-BOOT-R7607.bin
Boot image version: 7.1.064, Release 7607
Compiled Dec 09 2016 16:00:01
System image: cfa0:/HSR6800-CMW710-SYSTEM-R7607.bin
System image version: 7.1.064, Release 7607
Compiled Dec 09 2016 16:00:01
---- More ----
Displaying the running statistics for the router
For diagnosis or troubleshooting, you can use separate display commands to collect running status
data module by module, or use the display diagnostic-information command to bulk collect
running data for multiple modules. This command displays the output of the display clock, display
version, display device, and display current-configuration commands.
•
Save the operating statistics for each module of the router.
<Sysname> display diagnostic-information
Save or display diagnostic information (Y=save, N=display)? [Y/N]:y
Please input the file name(*.diag)[cfa0:/default.diag]:aa.diag
Diagnostic information is outputting to cfa0:/aa.diag.
Please wait...
Recv slot 4 response packet.
Save successfully.
Execute the more aa.diag command in user view, and then press the Page Up and Page
Down keys to view the contents of the file aa.diag.
•
Display the operating statistics for each module of the router.
<Sysname> display diagnostic-information
Save or display diagnostic information (Y=save, N=display)? [Y/N]:n
=================================================
51
- Quick Links:
- Cooling System
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
