Table of Contents
Advertisement
Available languages
Available languages
Problem
The oven does not heat
up.
The oven does not heat
up.
The oven does not heat
up.
The oven does not heat
up.
The oven lamp does not
operate.
The core temperature
sensor does not operate.
The oven does not heat
up. The display shows
Demo.
The display shows an er-
ror code.
Possible cause
The clock is not set.
The necessary settings
are not set.
The automatic switch-off
is on.
The fuse in the fuse box
is released.
The oven lamp is defec-
tive.
The plug of the core tem-
perature sensor is not
correctly installed into the
socket.
The demo mode is acti-
vated.
There is an electronic
fault.
ENGLISH
Remedy
Set the clock. Refer to
"Setting the time of day".
Make sure that the set-
tings are correct.
Refer to "Automatic
switch-off".
Do a check of the fuse. If
the fuse is released more
than one time, contact a
qualified electrician.
Replace the oven lamp.
Put the plug of the core
temperature sensor as far
as possible into the sock-
et.
1.
Deactivate the appli-
ance.
2.
Press and hold the
button +.
3.
When an acoustic
signal sounds, turn
the knob for the oven
functions to the first
function. Demo
flashes in the display.
4.
Turn the knob for the
oven functions to the
off position.
5.
Release the button +.
6.
Turn the knob for the
temperature clock-
wise for three sec-
onds. The acoustic
signal sounds three
times. The demo
mode is deactivated.
1.
Deactivate the appli-
ance with the house
fuse or the safety
switch in the fuse box
and activate it again.
2.
If the display shows
the error code again,
contact the service
centre.
35
Advertisement
Chapters
Table of Contents
