Table of Contents
Advertisement
Confirming switch mode of FC switch module
To confirm the switch mode
1
Click Start > Programs > Accessories > Communications >
.
HyperTerminal to boot up terminal software.
2
The Connection Description window is displayed. Enter telnet1, and
.
then click OK.
3
Select TCP/IP (Winsock), enter < IP address > in the Host address
.
box, and then click OK.
< IP address >:IP address for the target switch module. See
address setup procedure for switch module on page 4-18
4
The login prompt is displayed in the terminal.
.
5
Enter admin as login name, and then press Enter key.
.
6
Enter password as password, and then press Enter key.
.
Figure 4-27 Connecting to FC switch module
Common process for replacement
Hitachi Compute Blade 500 Series System Service Manual
Internal IP
section.
4-25
- Quick Links:
- Server Blade
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
