Table of Contents
Advertisement
Updating BMC/EFI firmware on server blade
Tip: Before performing the following procedures, you must download the
updated firmware file from Hitachi Data System support portal to the console
PC.
1
[For CB 520A A1, CB 520H A1/B1/B2/B3/B4, CB 540A A1/B1, and Non-
.
SMP CB 520X B1/B2/B3]
Select Resources tab and select Modules > Server Blades > a target
blade that should update the firmware.
[For SMP CB 520X B1/B2/B3]
Select Resources tab and select Modules > Server Blades > Server
Blade n of the SMP configuration > a target blade that should
update the firmware.
2
Select Condition tab.
.
3
Click Action and then select Update Firmware.
.
4
The update dialog box is displayed. Click Browse and select the new
.
firmware file.
5
Click Confirm.
.
6
The confirmation dialog box appears. Click OK and then firmware update
.
will start.
7
After the firmware update process has completed, the successful message
.
dialog box appears. Click Close.
9-2
Figure 9-1 Select the updated firmware
Updating firmware
Hitachi Compute Blade 500 Series System Service Manual
- Quick Links:
- Server Blade
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
