Mouse Cabling - IBM xSeries 445 Type 8870 Option Installation Manual

Hide thumbs Also See for xSeries 445 Type 8870:

Table of Contents

Mouse cabling

Your server has one mouse connector located on the back of the server. Use this

connector to connect a mouse to the server. For detailed information about this

option and how to connect it to your server, see the documentation that comes with

the option.

Keyboard cabling

Your server has one keyboard connector on the back of the server. Use this port to

connect the server to a keyboard or optional console switch. You can also connect

a USB keyboard to the server using one of the USB connectors. After installing a

USB keyboard, you might need to use the Configuration/Setup Utility program to

enable keyboardless operation and prevent the POST error message 301 from

being displayed during startup. For detailed information about this option and how

to connect it to your server, see the documentation that comes with the option.

Gigabit Ethernet cabling

Your server has two Ethernet connectors on the back of the server. Use these

connectors to connect the server to a LAN.

Note: A third Ethernet connector is located on the Remote Supervisor Adapter. This

Remote Supervisor Adapter cabling

Your server comes with a Remote Supervisor Adapter. For information about cabling

the Remote Supervisor Adapter connectors, see the User's Guide on the IBM

xSeries Documentation CD.

connector is used for specific supervisory functions and should not be

confused with the Gigabit Ethernet connector located next to the USB

connectors.

Chapter 2. Installing options

Table of Contents