Table of Contents
Advertisement
07
Recording
REC
7
Start recording.
If you want to set a recording end time, press
REC button repeatedly. The recording
the
time increases in 30 minute increments, up
to a maximum of six hours. The time the
recording will end is shown on-screen and in
the front panel display. When the recording
ends, the recorder automatically switches
into standby if no other operation is being
performed.
• To cancel the set recording time, press
REC.
• If you want to pause recording at any
1
time
, press
restart the recording (If recording to the
HDD, DVD-RAM or in VR mode, a new
chapter is started after recording
restarts).
STOP REC
8
Press to stop recording.
• If you set the recording time in the
previous step, you can still stop the
recording anytime by pressing
REC.
• Recording will stop automatically when
there is no more space on the HDD/
DVD, or after 12 hours of HDD recording
(whichever is sooner).
If VPS/PDC is active for two timer
programs that are programmed to start
at the same time, then the program that
actually starts first takes priority.
Note
74
1 Except during Chase Play.
En
PAUSE. Press again to
STOP
Tip
• During recording you can turn on/off the
SCART loop through function. During
recording, press the front panel CH +
button to switch to SCART THRU (loop
through on), or CH – to switch to SCART
NORM (loop through off). Loop through
is automatically reset to off after
recording has finished. Note that you
can't switch loop through on if recording
from the AV2(INPUT 1/DECODER) or
AV1(RGB)-TV connectors.
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
