Table of Contents
Advertisement
Siemens
Building Technologies
20.1.4 Interplay with SYNERGYR central unit OZW30
Based on the room temperature of the individual apartments, the OZW30 central
unit (software version 3.0 or higher) generates a load compensation signal. This
signal is passed on via LPB to the controller where it leads to an appropriate
change of the flow temperature setpoint.
The heating circuit that shall be acted upon must be selected on the OZW30.
20.2 Communication with other devices
The RVP360 offers the following communication choices:
Signalling the heat demand of several RVP360 to the heat source
Exchange of locking and forced signals
Exchange of measured values, such as outside temperature, return temperature
and flow temperature, plus clock signals
Communication with other devices
Exchange of error messages
For detailed information about communication via LPB, refer to the following pieces
of documentation:
Data Sheet N2030: LPB Basic System Data
Data Sheet N2032: LPB Basic Engineering Data
Basic Documentation RVP360
20 Communication
93/106
CE1P2546en
2017-07-24
- Quick Links:
- Brief Description and Key Features
Hide quick links:
Advertisement
Table of Contents
