Document History - Siemens SIPART PS2 Operating Instructions Manual
Electropneumatic positioner
Hide thumbs
Also See for SIPART PS2:
- Operating instructions manual (372 pages) ,
- Compact operating instructions (294 pages) ,
- Manual (200 pages)
Table of Contents
Advertisement
Introduction
1.3 Document history
1.3
Document history
The most important changes in the documentation when compared with the respective
previous edition are given in the following table.
Edition
05/2017
See also
Positioner with flameproof enclosure (Page 249)
Diagnostics (Page 198)
14
Note
● Section Parameter assignment (Page 137):
–
'35.YA' Start of manipulated variable limit / '36.YE' End of manipulated
variable limit (Page 155): Supplemented by the 'Dead angle' function.
–
'39.YCLS' Tight closing/fast closing with manipulated variable (Page 157):
Extended by the fast closing functions 'Fu' ... 'Fd'.
–
'51.PNEUM' Pneumatics type (Page 164): Parameter name was changed
from 'Fail in place' to 'Pneumatics type'. An inadvertent changing of the
parameter is now prevented. Parameter was extended to include the new
function 'booSt'.
–
Monitoring/compensation of pneumatic leakage 'C.\\LEAK' (Page 174):
Leakage compensation is new.
● New diagnostics values in section Meaning of the diagnostics values
(Page 201):
–
Diagnostic value '57.LKPUL - Length of the leakage compensation pulse'
(Page 213)
–
Diagnostic value '58.LKPER - Period of the leakage compensation pulse'
(Page 213)
● Section Technical specifications > Certificates, approvals, explosion protection
(Page 235) was adapted.
● The instructions A5E00097485 'Non Contacting Sensor' and A5E03830794
'External position detection system' were integrated in these operating
instructions in the Appendix under External position detection with NCS or
external position detection system (Page 259).
The instructions A5E00097485 and A5E03830794 are no longer valid effective
immediately.
● Accessory part 'pressure gauge block' is now available in the Appendix under
Pressure gauge block (Page 283)
● The instruction A5E33071227 of the accessory part 'Sealing plug/thread adapter'
was integrated in these operating instructions in the Appendix under Sealing
plug / thread adapter (Page 285).
● If you are operating a booster at the positioner, see the section Booster
(Page 289) in the Appendix
SIPART PS2 with and without HART
Operating Instructions, 05/2017, A5E00074631-AC
Advertisement
Chapters
Table of Contents
