Page 1
Natural Gas to L.P. Gas Conversion Kit For Bosch 80% AFUE Gas Furnace, BGS80 Model Installation Instructions 3124627...
Page 2
2 | Natural Gas to L.P. Gas Conversion Kit Installation Instructions Data subject to change without prior notice. | 05.2018 Bosch Thermotechnology Corp.
2.5 Reinstalling the Burner Assembly 2.6 Pressure Gauge Installation 2.8 Checking the Manifold Pressure 2.9 Adjusting the Manifold Pressure 2.10 Removing the Pressure Gauge or U-Tube Manometer 2.11 Completing the Conversion Data subject to change without prior notice. | 05.2018 Bosch Thermotechnology Corp.
1 Key to Symbols and Safety Instructions 1.2 Safety Instructions The conversion kit supplied with the Bosch 80% AFUE Gas Furnace BGS80 model 1.1 Key to Symbols is only to be used for gas furnace installations to convert a natural gas furnace to a propane (LP) gas application for elevations less than 2000 ft.
Remove the wires from the terminals of the gas valve. Remove supply gas piping from the gas valve. All Bosch 80% AFUE Gas Furnaces come standard with Natural Gas to LP Conversion Kits. These kits are only applicable for units installed at elevations between 0 and 2,000 feet.
fl ame to check for gas leaks. Reconnect the wires to the gas valve terminals. Reconnect the igniter at the 2 position plug. Reconnect the fl ame sensor wire. Data subject to change without prior notice. | 05.2018 Bosch Thermotechnology Corp.
Turn ON the electrical power to the unit. Turn ON the main gas supply to the unit at the manual shut-off valve, which is located outside of the unit. Figure 4 Burner inspection Data subject to change without prior notice. | 05.2018 Bosch Thermotechnology Corp.
Page 8
United States of America Bosch Thermotechnology Corp. 65 Grove Street Watertown, MA 02472 Tel: 1-866-642-3198 Fax: 1-954-776-5529 www.boschheatingandcooling.com BTC 770303102 A / 05.2018...