Table of Contents
Advertisement
4. Browse to the certificate file and click Open. The File Upload window closes and
returns you to the Update Certificate Files dialog box.
5. In the Web Server Password: field, enter the certificate password.
6. Enter the password again in the Web Server Re-enter Password: field.
7. Select a Connect to SVP certificate file to update. Click the Connect to SVP
checkbox, then click Browse.
8. Browse to the certificate file and click Open. The File Upload window closes and
returns you to the Update Certificate Files dialog box.
9. In the Connect to SVP Password: field, enter the certificate password.
10. Enter the password again in the Connect to SVP Re-enter Password: field.
11. Click Apply to update the certificates.
Releasing HTTP communication blocking
If the web server supports SSL (HTTPS), you can use the HTTP setting tool to release a
block to the HTTP communication port as needed.
Before you begin
You must have the Storage Administrator (Initial Configuration) role to perform this
■
task.
You must be logged into the SVP.
■
Procedure
1. Close all Device Manager - Storage Navigator sessions on the SVP.
2. Open a command prompt window with administrator permissions.
3. In the folder where the HTTP setting tool is located, execute the following
command:
C:\MAPP\wk\Supervisor\MappIniSet>MappHttpRelease.bat
4. A completion message box displays. Press any key to acknowledge the message and
close the message box.
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
Chapter 5: Setting up security
Releasing HTTP communication blocking
155
Hide quick links:
Advertisement
Table of Contents
