(2) this device must accept any interference received, including interference that may cause undesired operation . Any changes or modifications not expressly approved by Motorola may void the user's authority to operate this device. ® Bluetooth is a registered trademark of the Bluetooth...
Attaching the Mission Critical Wireless Adapter to the Radio's Universal Connector Below are the steps to attach the Mission Critical Wireless Adapter PMLN5792 to the radio’s universal connector: 1. Ensure that the radio is turned off before attaching the adapter to the radio.
Page 5
Top Slot Tethered Audio Routing Screw Toggle Switch Spring Latch Blue Bottom Bottom Hooked Slot Figure 1 Mission Critical Wireless Adapter...
Page 6
Supported Bluetooth Devices • NTN2570A, HKXXXX Wireless Accessory Kit, NFP, 12" CABLE • NTN2573A, HKXXXX Wireless Accessory Kit, NFP, 9.5" CABLE • NTN2571A, HKXXXX Wireless Accessory Kit, NFP LED Status Indication State LED Indication Successful Power Up Blue LED Blinks 3 times Not Paired with any Blue LED Blinking...
Page 7
Mission Critical Wireless Adapter Pairing Procedure 1. Place the Bluetooth device in pairing mode. Refer to respective Bluetooth device’s user manual. 2. Refer to “Attaching the Mission Critical Wireless Adapter to the Radio's Universal Connector” on page 1 to attach the adapter to the radio.
Page 8
7. To replace with new Bluetooth device: a.Power OFF the Radio b.Press and hold the PTT button on the adapter while powering up the radio until the adapter provides LED indication. This indicates that the dongle has unpaired with the previously paired device and is ready to pair with the new device.
Page 9
Procedure” on page 4. Other Notes • The Mission Critical Wireless Adapter PMLN5792 is non-serviceable. • The Mission Critical Wireless Adapter PMLN5792 is for portable usage only. • The Mission Critical Wireless Adapter PMLN5792 only supports one Headset and one Bluetooth PTT POD.