Table of Contents
Advertisement
Hard drive connector board
Table 6-8
Hard drive connector board description and part number
Description
Hard drive connector board
Before removing the hard drive connector board, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the optical drive (see
3.
Remove the bottom cover (see
4.
Remove the battery (see
5.
Remove the hard drive (see
Remove the hard drive connector:
1.
Disconnect the cable from the system board ZIF connector (1).
2.
Remove the Phillips M2.0 × 3.0 screw (2) that secures the board to the computer.
3.
Remove the board from the computer (3).
Reverse this procedure to install the hard drive connector board.
(Preparation for disassembly on page
Optical drive on page
Bottom cover on page
Battery on page
41).
Hard drive on page
45).
34).
38).
Component replacement procedures
Spare part number
L20454-001
33).
51
- Quick Links:
- Product Description
- Memory Module
Hide quick links:
Advertisement
Table of Contents
