Control By Plc; Control Of The 3Rw30 With 24 V Dc By Plc - Siemens SIRIUS 3RW30 Manual
Industrial controls
Hide thumbs
Also See for SIRIUS 3RW30:
- Manual (212 pages) ,
- Operating instructions manual (22 pages) ,
- Assembly instructions manual (8 pages)
Table of Contents
Advertisement
16.5
Control by PLC
16.5.1
Control of the 3RW30 with 24 V DC by PLC
Figure 16-11 Wiring of the 3RW30 control and main circuits
(1) For permissible main and control voltage values (dependent on article number), refer to
chapter Technical data (Page 127).
(2) Automatic restart. Can result in death, serious injury, or property damage.
Faults caused by incorrect control voltage, a missing load, or a phase failure (refer to
chapter 3RW30: LEDs (Page 57)) are automatically reset when the system returns to
normal. An automatic restart is initiated and the 3RW restarted if a start command is
present at the input.
If you do not want the motor to start automatically, you must integrate suitable additional
components, e.g. phase failure or load monitoring devices, into the control and main
circuits.
(3) Alternatively, the motor feeder can be assembled as a fuseless or fused version with type
of coordination 1 or 2. For the assignment of fuses and switching devices, refer to chapter
Technical data (Page 127).
SIRIUS 3RW30 / 3RW40
Manual, 10/2018, NEB535199502000/RS-AB/005
WARNING
Typical circuit diagrams
16.5 Control by PLC
171
- Quick Links:
- Start Modes
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
