Table of Contents
Advertisement
Installation
3.6 Mounting on a pedestal
3.6
Mounting on a pedestal
Installation
1. Place the third housing guide of the device on the top edge of the pedestal
2. Press the device down against the pedestal until the spring catch locks in place
3. Connect the power supply, refer to the section "Power supply (Page 42)".
4. Fit the connectors for the digital input and digital output, refer to the section "Digital
input/output (Page 45)".
5. Connect the device to the DSL connection, refer to the section "DSL interface (Page 47)".
6. Connect the device to the local network, refer to the section "Ethernet port (Page 48)".
7. Connect the terminal with as short a cable as possible ≤ 150 mm and a large cross-
sectional area ≥ 1.5 mm² to the functional ground of the system, see section "Grounding
(Page 44)" and section "Terminals (Page 23)".
36
Operating Instructions, 08/2016, C79000-G8976-C343-04
①
.
②
.
SCALANCE M812, M816
Advertisement
Table of Contents
