Overview of the Remote Control ......28 Contents General DVD Operation ........29 Safety Information ........... 2 Markings on the Product.......... 2 Environmental Information........4 Disposal Information ..........4 REACH information ..........5 EU Conformity Statement ........5 Features ..............6 Accessories Included..........
• Do not place any heat sources such as electric Safety Information heaters, radiators, etc. near the TV set. • Do not place the TV on the floor and inclined CAUTION surfaces. • To avoid danger of suffocation, keep plastic bags RISK OF ELECTRIC SHOCK out of the reach of the babies, children and domestic DO NOT OPEN...
Page 4
WARNING WALL MOUNTING WARNINGS Do not ingest the battery, Chemical Burn Hazard • Read the instructions before mounting your TV This product or the accessories supplied with the on the wall. product may contain a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause •...
Environmental Information This television is designed to be environment friendly. To reduce energy consumption, you can follow these steps: If you set the Energy Saving to Minimum, Medium, Maximum or Auto the TV will reduce the energy consumption accordingly. If you like to set the Backlight to a fixed value set as Custom and adjust the Backlight (located under the Energy Saving setting) manually using Left or Right buttons on the remote.
Restriction of Chemicals), entered into force on 1 June 2007, with phased deadlines to 2018. Toshiba will meet all REACH requirements and is committed to provide our customers with information about the presence in our articles of substances included on the candidate list according to REACH regulation.
TV. function and control refer to the full manual on our To change volume: Increase the volume by pushing the website at http://www.toshiba-tv.com the button up. Decrease the volume by pushing the button down. To change channel: Press the middle of the button in, the information banner will appear on the screen.
To change source: Press the middle of the button in to select the position that you want the item to move twice(for the second time in total), the source list will to and press OK. appear on the screen. Scroll through the available 2.
Max Timeshift: This setting allows you to set the Inserting the Batteries into the Remote maximum duration for the timeshift recording. Remove the back cover to reveal the battery Available options are approximate and the actual compartment. Insert two size AAA batteries. Make recording time may change in practice depending on sure the (+) and (-) signs match (observe correct the broadcast.
DVB is a registered trademark of the DVB Project. License Notification [1] EIA/CEA-861-D compliance covers the transmission The terms HDMI and HDMI High-Definition Multimedia of uncompressed digital video with high-bandwidth Interface, and the HDMI Logo are trademarks or digital content protection, which is being standardized registered trademarks of HDMI Licensing Administrator, for reception of high-definition video signals.
Remote Control Standby: Switches On / Off the TV Source: Shows available broadcast and content sources Numeric buttons: Switches the channel, enters a number or a letter in the text box on the screen. Language: Switches among sound modes (analogue TV), displays and changes audio/subtitle language and turns subtitles on or off (digital TV, where available) Menu: Displays TV menu...
Connections See the illustrations on the left side. You Connector Type Cables Device can use YPbPr to VGA cable to enable YPbPr signal via VGA input. You cannot Connection use VGA and YPbPr at the same time. (back) (**) To enable PC/YPbPr audio, you will AUDIO IN (**) need to use the side audio inputs with PC/YPbPr...
selected broadcast type during the search process Switching On/Off and the channels of it will be listed on the top of the To Switch the TV On channel list. When finished, highlight Next and press OK to continue. Connect the power cord to a power source such as a wall socket (220-240V AC, 50 Hz).
To start a Fransat installation set the Install Type as After the initial settings are completed TV will start Operator and then set the Satellite Operator as the to search for available broadcasts of the selected related Fransat operator. Then press the OK button broadcast types.
NTFS disk formatting but recording (Optional) will not Some stream packets may not be recorded because be available with NTFS formatted disks. of signal problems, as a result sometimes videos may freeze during playback. While formatting USB hard drives which have Record, Play, Pause, Display (for playlist dialogue) keys more than 1TB (Tera Byte) storage space you may can not be used when teletext is on.
status of a function highlight the symbol of the function Note: Default PIN could have been set to 0000 or 1234. If you have defined the PIN(is requested depending on the country and press OK as much as needed. If the symbol is selection) during the First Time Installation use the PIN that marked with a red cross, that means it is deactivated.
Settings Menu Contents Picture Menu Contents You can change the picture mode to suit your preference or requirements. Picture mode can Mode be set to one of these options: Cinema, Game(optional), Sports, Dynamic and Natural. Contrast Adjusts the light and dark values on the screen. Brightness Adjusts the brightness values on the screen.
Page 18
Sound Menu Contents Volume Adjusts the volume level. Equalizer Selects the equalizer mode. Custom settings can be made only when in User mode. Balance Adjusts whether the sound comes from the left or right speaker. Sets headphone volume. Headphone Please ensure before using headphones that the headphone volume is set to a low level, to prevent damage to your hearing.
Page 19
Select Active This setting allows you to select only the broadcasts within the selected network to be Network listed in the channel list. This feature is available only for the country option of Norway. You can use this menu item to monitor signal related information such as signal level/ Signal Information quality, network name etc for available frequencies.
Page 20
System Menu Contents Conditional Access Controls conditional access modules when available. Language You may set a different language depending on the broadcaster and the country. Enter correct password to change parental settings. You can easily adjust Menu Lock, Maturity Lock, Child Lock or Guidance in this menu. You can also set a new PIN or change the Default CICAM PIN using the related options.
Child Lock: If this option is set to On, the TV can only General TV Operation be controlled by the remote control. In this case the control buttons on the TV will not work. Using the Channel List Set PIN: Defines a new PIN number. The TV sorts all stored stations in the channel list.
programme guide matching the selected genre will Teletext Services be highlighted. Press the Text button to enter. Press again to activate Guide Search: Displays searching options. Using mix mode, which allows you to see the teletext page these options, you can search the programme guide and the TV broadcast at the same time.
No picture PC Input Typical Display Modes • TV is not receiving any signal. Make sure the correct The following table is an illustration of some of the source has been selected. typical video display modes. Your TV may not support •...
Supported DVI Resolutions When connecting devices to your TV’s connectors by using DVI converter cable(DVI to HDMI cable - not supplied), you can refer to the following resolution information. 56Hz 60Hz 66Hz 70Hz 72Hz 75Hz 640x400 640x480 800x600 832x624 1024x768 1152x864 1152x870 1280x768...
• Do not use solvents such as benzine, thinner, DVD Mode ( Depending on the model) commercially available cleaners or anti-static spray intended for vinyl LPs. Safety Information CAUTION How to Watch a DVD DVD Player is a class 1 laser product. However this product uses a visible laser beam which could cause When placing a disc into the loader, labelled side of hazardous radiation exposure.
Notes on Playback • Wrong type of disc. The machine cannot play CD- ROMS etc. The region code of the DVD must match No sound will be heard during fast forward or the player. rewind. No sound will be heard during slow motion play. Wrong OSD language Reverse slow motion play may not be available •...
Disc Types Compatible with This Unit Disc Types Recording Disc Max. Playing Characteristics Types Size Time (Logos) • DVD contains excellent sound and video Single- Audio due to Dolby Digital and MPEG-2 System. sided; 240 min. 12 cm • Various screen and audio functions can Double- be easily selected through the on screen Video...
Overview of the Remote Control Standby Source selection Numeric buttons Audio language selection TV Menu Volume Up / Down Time Navigation buttons OK / Select 10. Back / Previous menu 11. Coloured buttons; Red button - Zoom Green button - Repeat Yellow button - Root Blue button - Title 12.
General DVD Operation You can operate DVD, movie CD, music or picture CD’s content by using the proper buttons on your remote control. Below are main functions of commonly used remote control buttons. Buttons DVD Playback Movie Playback Picture Playback Music Playback Play Play...