Accessing The Camera Using The Web Browser - Sony SNC-RZ25N User Manual

Sony network camera user's guide snc-rz25n/rz25p

Hide thumbs Also See for SNC-RZ25N:

Install manual (123 pages)

User manual (92 pages)

Brochure & specs (6 pages)

Table Of Contents

Table of Contents

Enlarged version

Accessing the Camera

Using the Web Browser

When the IP address has been assigned to the camera,

check that you can actually access the camera using the

Web browser installed in your computer.

Use Internet Explorer as the Web browser.

Start the Web browser on the computer and type the

IP address of the camera in the URL box.

The welcome page of "Network Camera SNC-

RZ25N" or "Network Camera SNC-RZ25P" is

displayed.

Click Enter.

The main viewer is displayed.

When the main viewer is correctly displayed, the IP

address assignment is completed.

When the main viewer of the camera is

displayed for the first time

When you click Enter, "Security warning" is displayed.

When you click OK, the ActiveX control is installed and

the main viewer is displayed.

Notes

• If Automatic configuration is enabled in the Local

Area Network (LAN) Settings on Internet Explorer,

the image may not be displayed. In this case, disable

Automatic configuration and set the Proxy server

manually. For setting the Proxy server, consult your

network administrator.

• When you install ActiveX viewer on Windows 2000

or Windows XP, you should have logged in the

computer as the Administrator.

Tip

Every page of this software is optimized as display

character size Medium for Internet Explorer.

To display the Welcome page correctly

To operate the welcome page correctly, set the security

level of the Internet Explorer to Medium or lower, as

follows:

Select Tool from the menu bar for Internet

Explorer, then select Internet Options and

Security tab in sequence.

Click the Internet icon (when using the camera via

the Internet) or Local intranet icon (when using

the camera via a local network).

Set the slider to Medium or lower. (If the slider is

not displayed, click Default Level.)