Table of Contents
Advertisement
Corrective maintenance
10.2 Replacing spare parts
3. Disconnect the wires.
4. Remove the power supply.
The power supply is removed.
❒
Installing the power supply
1. Mount the power supply on the top hat rail.
2. Connect the wires.
3. Install the front cover.
4. Insert 2 screws (torx 25) of the front cover.
Tightneing torque: 3 Nm.
The power supply board is installed.
❒
10.2.4.5
Replacing the fuse for the external fan
Precondition
The converter power supply is switched off.
Required tools
● Torque wrench for TX-20 screws
● Torque wrench for TX-25 screws
● Slot screwdriver 0.6 mm × 3.5 mm
850
Operating Instructions, 03/2019, FW V1.0, A5E44751205B AB
SINAMICS G120XA converter
Advertisement
Table of Contents
