General
Current
SM Bus
consumption
24 VDC
Inputs/outputs
Table A- 14
SB 1223 combination digital input/output (DI / DQ) modules
General
Order number
Dimensions (W x H x D)
Weight
Power dissipation
Current
SM Bus
consumption
24 VDC
Inputs/outputs
Note
The high-speed (200 kHz) SBs utilize "sourcing" inputs. The standard SB (20 kHz) utilizes
"sinking" inputs. Refer to the specifications for the digital inputs and outputs (Page 249).
The high-speed (200 kHz) outputs (SB 1222 and SB 1223) can be either sourcing or sinking.
For sourcing outputs, connect "Load" to "-" (shown). For sinking outputs, connect "Load" to
"+". Because both sinking and sourcing configurations are supported by the same circuitry,
the active state of a sourcing load is opposite that of a sinking load. A source output exhibits
positive logic (Q bit and LED are ON when the load has current flow), while a sink output
exhibits negative logic (Q bit and LED are OFF when the load has current flow). If the
module is plugged in with no user program, the default for this module is 0V, which means
that a sinking load will be turned ON.
Easy Book
Manual, 11/2011, A5E02486774-04
SB 1221 4 DI (200 kHz)
40 mA
24 VDC: 7 mA / input + 20 mA
5 VDC: 15 mA / input + 15 mA
4 inputs (source)
SB 1223 DI / DQ (200 kHz)
24 VDC: 6ES7 223-3BD30-0XB0
5 VDC: 6ES7 223-3AD30-0XB0
38 x 62 x 21 (mm)
35 grams
24 VDC: 1.0 W
5 VDC: 0.5 W
35 mA
24 VDC: 7 mA / input + 20 mA
5 VDC: 15 mA / input + 15 mA
2 inputs (source)
2 outputs (solid state - MOSFET)
Technical specifications
A.3 Digital I/O modules
SB 1222 4 DQ (200 kHz)
35 mA
15 mA
4 outputs (solid state - MOSFET)
SB 1223 2 DI / 2 DQ
6ES7 223-0BD30-0XB0
38 x 62 x 21 (mm)
40 grams
24VDC: 1.0 W
50 mA
4 mA / Input used
2 inputs (IEC Type 1 sink)
2 outputs (solid state - MOSFET)
243