Adding Modules To The Configuration - Siemens SIMATIC S7-1200 Manual
Easy book
Hide thumbs
Also See for SIMATIC S7-1200:
- System manual (1614 pages) ,
- Function manual (527 pages) ,
- Manual (364 pages)
Table of Contents
Advertisement
Easy to create the device configuration
5.3 Adding modules to the configuration
5.3
Adding modules to the configuration
Use the hardware catalog to add modules to the CPU:
● Signal module (SM) provides additional digital or analog I/O points. These modules are
● Signal board (SB) provides just a few additional I/O points for the CPU. The SB is
● Communication board (CB) provides an additional communication port (such as RS485).
● Communication module (CM) and communication processor (CP) provide an additional
To insert a module into the hardware configuration, select the module in the hardware
catalog and either double-click or drag the module to the highlighted slot.
74
connected to the right side of the CPU.
installed on the front of the CPU.
The CB is installed on the front of the CPU.
communication port, such as for PROFIBUS or GPRS. These modules are connected to
the left side of the CPU.
Easy Book
Manual, 11/2011, A5E02486774-04
Hide quick links:
Advertisement
Table of Contents
