Use On Clothing; Use On Curtains And Upholstery; Lint Brush; Ironing Function - Silvercrest SDRB 1000 B1 Operating Instructions Manual
Hide thumbs
Also See for SDRB 1000 B1:
- Operating instructions manual (200 pages) ,
- Short manual (76 pages) ,
- Operating instructions manual (64 pages)
Table of Contents
Advertisement
Available languages
Available languages
Use on clothing
♦
Hang the creased piece of clothing onto a coat
hanger.
♦
Gently stretch the item with one hand and hold
it, then apply steam from top to bottom. Com-
bine steam with the clothes brush
removal of all creases.
♦
Gently apply pressure with the clothes brush
and move the appliance over the piece of cloth-
ing from top to bottom. You can press the steam
burst button
at brief intervals.
NOTE
►
Only repeat pressing the steam burst button
until the heat-up indicator lamp
water drips from the ironing sole
the heat-up indicator lamp
initiating another burst of steam.
♦
If the heat-up indicator lamp
operation, do not press the steam blast button
again. Wait a few seconds until the heat-up
indicator lamp
goes out before pressing the
steam blast button
NOTE
►
If you press the steam burst button
heat-up indicator lamp
appliance will produce condensation instead
of steam, and water will drip from the ironing
sole
.
♦
Allow treated clothes to cool down on a coat
hanger before wearing them.
Use on curtains and upholstery
♦
You can remove creases and wrinkles from
draperies by hanging them on a rail.
♦
Simply adhere to the instructions under "Use on
clothing".
♦
Always carry out a test treatment on an invisible
patch of the item.
♦
If you are using the appliance horizontally, turn
it vertical every now and then to produce the
greatest possible amount of steam.
│
GB │ IE
■
20
for gentle
lights up or
. Wait until
goes out before
lights up during
again.
while the
is illuminated, the
Lint brush
♦
To remove lint, string and hair, slowly guide the
red lint brush
over your clothes from left to
right.
♦
Moving the lint brush
similar materials in the opposite direction (i.e.,
from right to left) will clean the brush.
Ironing function
♦
Remove the brush extension
pliance (see "Attaching/removing the brush
extension").
♦
The appliance must be connected to correctly
installed and earthed mains power sockets only.
♦
Set the temperature control
with the international care symbols (laundry
label) or the type of fabric. The heat-up indicator
lamp
lights up. As soon as the selected tem-
perature has been reached, the heat-up indicator
lamp
goes out.
Laundry
Type of
label
Synthetic fibre
e.g. viscose,
polyester
Silk, wool
NOTE
►
If in doubt, start with a low temperature and
gradually increase it. For sensitive fabric, we
recommend that you iron an invisible patch
(inside of the seam) first to ensure that the
ironing process does not cause damage.
over scrap fabric or
from the ap-
in accordance
Temperature
fabric
control
(low
temperature)
(medium
temperature)
cotton,
(high
linen
Temperature)
SDRB 1000 B1
Advertisement
Chapters
Table of Contents
