Table of Contents
Advertisement
HUAWEI USG6000 Unified Security Gateway
Hardware Guide
optical fibers is usually yellow, as shown in
optical fibers is usually orange, as shown in
the USG. Therefore, you need to purchase optical fibers as required.
Figure A-16 LC/PC-LC/PC single-mode optical fiber
Figure A-17 LC/PC-LC/PC multi-mode optical fiber
To ensure the normal transmission of optical signals, do not use single-mode optical fibers
to connect multi-mode optical modules or multi-mode optical fibers to connect
single-mode optical modules.
To connect extension optical fibers, purchase LC/PC-LC/PC adapters.
Optical fibers have multiple types of connectors. Common connectors are LC/PC, SC/PC, and
FC/PC.
Issue 03 (2015-01-26)
LC/PC connector
The procedure and precautions for inserting and removing LC/PC connectors are as
follows:
−
Insert and remove the connector along the axis without rotating the connector.
−
When you insert the fiber, carefully insert the fiber head to the optical interface on the
interface board.
To remove the optical fiber, press the pinch on the fiber connector, slightly push the
−
fiber connector and then pull it out.
SC/PC connector
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
A-16; whereas the cover of multi-mode
Figure
A-17. Optical fibers are not delivered with
A Appendix
258
- Quick Links:
- Device Overview
- Usg6300 Product Series
Hide quick links:
Advertisement
Table of Contents
