Warranty And Liability - Siemens SITOP PSU8600 Manual
Shutdown ipcs in the buffer mode
Hide thumbs
Also See for SITOP PSU8600:
- Manual (420 pages) ,
- Function manual (94 pages) ,
- Manual (70 pages)
Table of Contents
Advertisement
Warranty and Liability
Warranty and Liability
The Application Examples are not binding and do not claim to be complete with regard to
Note
configuration, equipment or any contingencies. The Application Examples do not repre-
sent customer-specific solutions. They are only intended to provide support for typical
applications. You are responsible for the correct operation of the described products.
These Application Examples do not relieve you of the responsibility of safely and profes-
sionally using, installing, operating and servicing equipment. When using these Applica-
tion Examples, you recognize that we cannot be made liable for any damage/claims be-
yond the liability clause described. We reserve the right to make changes to these Appli-
cation Examples at any time and without prior notice. If there are any deviations between
the recommendations provided in this Application Example and other Siemens publica-
tions – e. g. catalogs – the contents of the other documents shall have priority.
We do not accept any liability for the information contained in this document.
Any claims against us – based on whatever legal reason – resulting from the use of
the examples, information, programs, engineering and performance data etc., de-
scribed in this Application Example shall be excluded. Such an exclusion shall not
apply in the case of mandatory liability, e.g. under the German Product Liability Act
("Produkthaftungsgesetz"), in case of intent, gross negligence, or injury of life, body
or health, guarantee for the quality of a product, fraudulent concealment of a defi-
ciency or breach of fundamental contractual obligations ("wesentliche Vertrag-
spflichten"). The compensation for damages due to a breach of a fundamental con-
tractual obligation is, however, limited to the foreseeable damage, typical for the
type of contract, except in the event of intent or gross negligence or injury to life,
body or health. The above provisions do not imply a change of the burden of proof
to your detriment.
Any form of duplication or distribution of these Application Examples or excerpts
hereof is prohibited without the expressed consent of Siemens AG.
Siemens provides products and solutions with Industrial Security functions that support
Security
the secure operation of plants, systems, machines and networks.
informa-
In order to secure plants, systems, machines and networks against cyber threats it is
tion
necessary to implement (and to maintain continuously) a holistic, state-of-the-art Industrial
Security concept. With this in mind, Siemens' products and solutions are only part of such
a concept.
It is the client's responsibility to prevent unauthorized access to his plants, systems, ma-
chines and networks. Systems, machines and components should only be connected with
the company's network or the Internet, when and insofar as this is required and the ap-
propriate protective measures (for example, use of firewalls and network segmentation)
have been taken.
In addition, Siemens' recommendations regarding appropriate protective action should be
followed. For more information on Industrial Security, visit
http://www.siemens.com/industrialsecurity.
Siemens' products and solutions undergo continuous development to make them even
more secure. Siemens explicitly recommends to carry out updates as soon as the respec-
tive updates are available and always only to use the current product versions. The use of
obsolete or no longer supported versions can increase the risk of cyber threats.
In order to always be informed about product updates, subscribe to the Siemens Industrial
Security RSS Feed at http://www.siemens.com/industrialsecurity.
Shutdown IPCs in the SITOP PSU8600 Buffer Mode
Entry ID: 109737962,
V1.2,
10/2017
2
Advertisement
Table of Contents
