Table of Contents
Advertisement
IP Configuration
IPv6 Management and Interfaces
NOTE
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
-
The interface is Up.
-
IPv6 is enabled on it.
-
DHCPv6 stateless client is enabled on it.
•
Stateless Service—Is the client defined as stateless (receives configuration information
from a DHCP server) or not.
•
DHCP Server Address—Address of DHCPv6 server.
•
DHCP Server DUID—Unique identifier of the DHCPv6 server.
•
DHCP Server Preference—Priority of this DHCPv6 server.
•
Information Minimum Refresh Time— See above.
•
Information Refresh Time—See above.
•
Received Information Refresh Time—Refresh time received from DHCPv6 server.
•
Remaining Information Refresh Time—Remaining time until next refresh.
•
DNS Servers—List of DNS servers received from the DHCPv6 server.
•
DNS Domain Search List—List of domains received from the DHCPv6 server.
•
SNTP Servers—List of SNTP servers received from the DHCPv6 server.
•
POSIX Timezone String—Timezone received from the DHCPv6 server.
•
Configuration Server—Server containing configuration file received from the
DHCPv6 server.
•
Configuration Path Name—Path to configuration file on the configuration server
received from the DHCPv6 server.
IPv6 Tunnel
Tunnels enable transmission of IPv6 packets over IPv4 networks. Each tunnel has a source
IPv4 address and if it is a manual tunnel it also has a destination IPv4 address. The IPv6 packet
is encapsulated between these addresses.
Types of Tunnels
Only the IPv6 management interface can be tunneled. To create an IPv6 tunnel, define an IPv6
interface as a tunnel in the IPv6 Interfaces page and continue configuring the tunnel in the IPv6
tunnel page.
15
292
Hide quick links:
Advertisement
Table of Contents
