Table of Contents
Advertisement
17
STEP 3
STEP 1
STEP 2
407
•
Source IPv4 Address—Enter the source IPv4 address. The following options are
available:
-
Any—All IP addresses are included.
-
User Defined—Enter an IP address.
•
Source IPv4 Mask—Enter the source IPv4 address mask type and value. The following
options are available:
-
Network Mask—Enter the network mask.
-
Prefix Length—Enter the prefix length.
•
Action—Select an action for the access list. The following options are available:
-
Permit—Permit entry of packets from the IP address(es) in the access list.
-
Deny—Reject entry of packets from the IP address(es) in the access list.
Click Apply. The settings are written to the Running Configuration file.
Source IPv4 Access List
To populate an access list with IP addresses.
Click IP Configuration > > IPv4 Management and Interfaces > Access List > Source IPv4
Address List.
To modify the parameters of an access list, click Add and modify any of the following fields:
•
Access List Name—Name of the access list.
•
Source IPv4 Address—Source IPv4 address. The following options are available:
-
Any—All IP addresses are included.
-
User Defined—Enter an IP address.
•
Source IPv4 Mask—Source IPv4 address mask type and value. The following options
are available:
-
Network Mask—Enter the network mask (for example 255.255.0.0).
-
Prefix Length—Enter the prefix length.
•
Action—Action for the access list. The following options are available:
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
IP Configuration: RIPv2
Access Lists
Hide quick links:
Advertisement
Table of Contents
