Table of Contents
Advertisement
16
STEP 7
STEP 1
STEP 2
STEP 3
STEP 4
305
•
IP Version—Enter the version of the source IP address: Version 6 or Version 4.
•
IP Address—Enter the source IP address.
•
Mask—Select the format for the subnet mask for the source IP address, and enter a
value in one of the fields:
-
Network Mask—Select the subnet to which the source IP address belongs and enter
the subnet mask in dotted decimal format.
-
Prefix Length—Select the Prefix Length and enter the number of bits that comprise
the source IP address prefix.
Click Apply. The access profile is written to the Running Configuration file. You can now
select this access profile as the active access profile.
Profile Rules
Access profiles can contain up to 128 rules to determine who is permitted to manage and
access the device, and the access methods that may be used.
Each rule in an access profile contains an action and criteria (one or more parameters) to
match. Each rule has a priority; rules with the lowest priority are checked first. If the incoming
packet matches a rule, the action associated with the rule is performed. If no matching rule is
found within the active access profile, the packet is dropped.
For example, you can limit access to the device from all IP addresses except IP addresses that
are allocated to the IT management center. In this way, the device can still be managed and has
gained another layer of security.
To add profile rules to an access profile:
Click Security > Mgmt Access Method > Profile Rules.
Select the Filter field, and an access profile. Click Go.
The selected access profile appears in the Profile Rule Table.
Click Add to add a rule.
Enter the parameters.
•
Access Profile Name—Select an access profile.
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
Security
Management Access Method
Hide quick links:
Advertisement
Table of Contents
