Table of Contents
Advertisement
21
STEP 4
Users
367
•
Security Level—Define the security level attached to the group. SNMPv1 and
SNMPv2 support neither authentication nor privacy. If SNMPv3 is selected, choose one
of the following:
-
No Authentication and No Privacy—Neither the Authentication nor the Privacy
security levels are assigned to the group.
-
Authentication and No Privacy—Authenticates SNMP messages, and ensures the
SNMP message origin is authenticated but does not encrypt them.
-
Authentication and Privacy—Authenticates SNMP messages, and encrypts them.
•
View—Select to associate a view with either read, write, and/or notify access privileges
of the group limits the scope of the MIB tree to which the group has read, write, and
notify access.
-
Read—Management access is read-only for the selected view. Otherwise, a user or
a community associated with this group is able to read all MIBs except those that
control SNMP itself.
-
Write—Management access is write for the selected view. Otherwise, a user or a
community associated with this group is able to write all MIBs except those that
control SNMP itself.
-
Notify—Limits the available content of the traps to those included in the selected
view. Otherwise, there is no restriction on the contents of the traps. This can only be
selected for SNMPv3.
Click Apply. The SNMP group is saved to the Running Configuration file.
An SNMP user is defined by the login credentials (username, passwords, and authentication
method) and by the context and scope in which it operates by association with a group and an
Engine ID.
The configured user have the attributes of its group, having the access privileges configured
within the associated view.
Groups enable network managers to assign access rights to a group of users instead of to a
single user.
A user can only belong to a single group.
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
SNMP
Users
Hide quick links:
Advertisement
Table of Contents
