Address Space - Siemens SIMATIC ET 200eco PN M12-L Equipment Manual
I/o device digital outputs dq 8x24vdc/0.5a m12-l 8xm12
Hide thumbs
Also See for SIMATIC ET 200eco PN M12-L:
- Operating instructions manual (278 pages) ,
- Compact operating instructions (156 pages) ,
- System manual (127 pages)
Table of Contents
Advertisement
Parameters/address space
4.3 Address space
4.3
Address space
The DQ 8x24VDC/0.5A M12-L 8xM12 I/O device can be configured differently; see following
table. Depending on the configuration, additional/different addresses are assigned in the
process images.
Configuration options of the DQ 8x24VDC/0.5A M12-L 8xM12 I/O device
You can configure the I/O device digital outputs with STEP 7 (TIA Portal) or with a GSD file.
When you configure the I/O device by means of the GSD file, the configurations are available
under different short designations/device names in the device view of your configuration
software.
The following configurations are possible:
Table 4- 2
Configuration options
Configuration
1 x 8-channel DQ 8x24VDC
1 x 8-channel DQ 8x24VDC QI
1 x 8-channel DQ 8x24VDC MSO
2 x 4-channel DQ 8x24VDC S
Address space for configuration as 1 x 8-channel DQ 8x24VDC
The following figure shows the address space allocation for the configuration as 8-channel
I/O device digital outputs without value status. The start address for the I/O device can be
assigned freely. The addresses of the channels are derived from the start address.
Figure 4-1
20
Short designation/
device name in the
GSD file (device view
in the configuration
software)
DQ 8x24VDC
DQ 8x24VDC QI
DQ 8x24VDC MSO
DQ 8x24VDC S
Address space for configuration as 1 x 8-channel DQ 8x24VDC without value status
I/O device digital outputs DQ 8x24VDC/0.5A M12-L 8xM12 (6ES7142-6BG00-0BB0)
Configuration software, e.g., with STEP 7 (TIA Portal)
Integrated in hardware
catalog STEP 7
(TIA Portal)
V16 or higher with HSP
0299
V16 or higher with HSP
0299
V16 or higher with HSP
0299
V16 or higher with HSP
0299
Equipment Manual, 07/2020, A5E46570894-AA
GSD file in
STEP 7 (TIA Portal) V11 or
higher or STEP 7 V5.5 SP4
HF1 or higher
X
X
X
X
- Quick Links:
- Pin Assignment
Hide quick links:
Advertisement
Table of Contents
