Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2019 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
19k
Advertisement
Related Manuals for Harbor Freight Tools Bauer 1925C-B
Summary of Contents for Harbor Freight Tools Bauer 1925C-B
- Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL.
-
Page 2: Table Of Contents
table of contents Safety ..........2 Maintenance ........11 Specifications ........8 Parts List and Diagram ......14 Setup ..........8 Warranty ..........16 Operation ..........9 WarninG SyMBOLS anD DeFinitiOnS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. -
Page 3: Safety
electrical Safety Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. personal Safety 1. Stay alert, watch what you are 3. prevent unintentional starting. doing and use common sense when ensure the power Switch is in the operating a power tool. - Page 4 Battery tool use and care 1. recharge only with the charger 3. When battery pack is not in use, keep specified by the manufacturer. it away from other metal objects, like A charger that is suitable for one type paper clips, coins, keys, nails, screws of battery pack may create a risk of fire or other small metal objects, that can when used with another battery pack.
- Page 5 These carry important safety information. Do not smoke or chew tobacco If unreadable or missing, contact in the work area. Harbor Freight Tools for a replacement. i. Clean up all removed paint and 14. Avoid unintentional starting. dust by wet mopping the floors.
- Page 6 Place the Charger on a stable, solid, 18. People with pacemakers should nonflammable surface (such as a stable consult their physician(s) before use. metal workbench or concrete floor) at least Electromagnetic fields in close proximity to 1 foot away from all flammable objects, such heart pacemaker could cause pacemaker as drapes or walls.
- Page 7 Grounding tO preVent eLectric SHOcK anD DeatH FrOM incOrrect GrOunDinG: check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the charger. Do not use the charger if the power cord or plug is damaged. if damaged, have it repaired by a service facility before use.
-
Page 8: Specifications
Specifications Battery Type Bauer 20V Li-ion Charger Type Bauer 20V Li-ion Maximum Temperature 895°F Setup - Before use: read the entire iMpOrtant SaFety inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. note: For additional information regarding the parts listed in the following pages, refer to Parts List and Diagram on page 14. -
Page 9: Operation
Operating instructions read the entire iMpOrtant SaFety inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. charging Battery pack Charge battery before using this tool. Follow instructions included with battery charger ( sold separately). - Page 10 General Operating instructions 1. Insert fully charged Battery Pack 4. Release Trigger to power off Heat Gun. into base of Heat Gun, making sure note: After Trigger is released, there it clicks into place securely. is a 6-second time lapse before the WarninG! to prevent personal injury or motor and LED light turn off.
-
Page 11: Maintenance
Maintenance and Servicing procedures not specifically explained in this manual must be performed only by a qualified technician. tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn: remove Battery pack before performing any inspection, maintenance, or cleaning procedures. tO preVent SeriOuS inJury FrOM tOOL FaiLure: Do not use damaged equipment. - Page 12 troubleshooting problem possible causes Likely Solutions Heat Gun will 1. Battery discharged. 1. Connect Battery to gun. not turn on. 2. Internal damage or wear. 2. Have technician service tool. (Switch, for example.) Temperature 1. Heat Gun not allowed enough 1.
- Page 13 record product’s Serial number Here: note: If product has no serial number, record note: Some parts are listed and shown month and year of purchase instead. for illustration purposes only, and are not available individually as replacement parts. Item 56791 For technical questions, please call 1-888-866-5797.
-
Page 14: Parts List And Diagram
parts List and Diagram parts List part Description part Description Right Housing Switch Cover Right Battery Extension Switch Back Cover LED Light Cover Motor Fan Safety Push Rod Heating Element Left Housing Metal Cover Screw Front Cover Left Battery Extension PCBA Trigger Reducer Nozzle... - Page 15 Diagram Item 56791 For technical questions, please call 1-888-866-5797. Page 15...
-
Page 16: Warranty
OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.