Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2020 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
20c
Advertisement
Related Manuals for Harbor Freight Tools Bauer 19116C-B
Summary of Contents for Harbor Freight Tools Bauer 19116C-B
- Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL.
-
Page 2: Table Of Contents
table of contents Safety ................2 Maintenance ..............8 Specifications ............5 Parts List and Diagram ..........10 Setup .................5 Warranty ..............12 Operation ..............7 WarninG SyMBOLS anD DEFinitiOnS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. -
Page 3: Safety
Lithium Battery Safety Warnings 2. DO nOt DO any OF tHE FOLLOWinG tO tHE BattEry pacK: a. Open, b. Drop, c. Short-circuit, d. puncture, e. incinerate, or LitHiuM BattEriES StOrE a f. Expose to temperatures greater than 140°F. LarGE aMOunt OF EnErGy 3. - Page 4 These carry important safety information. instructions and Epa regulations. If unreadable or missing, contact 3. Do not point the Sprayer at yourself, Harbor Freight Tools for a replacement. other people or animals. 10. The warnings, precautions, and instructions 4. Industrial applications must follow discussed in this instruction manual cannot OSHA requirements.
-
Page 5: Specifications
Specifications Charger Type Bauer 20 V Li-ion (sold separately) Battery Type Bauer 20 V Li-ion (sold separately) Tank Capacity 1 Gallon Maximum Output 28 PSI Hose Length Set up instructions read the EntirE iMpOrtant SaFEty inStructiOnS section at the beginning of this manual including all text under subheadings therein before set up or use of this product. - Page 6 assembly assembling the Spray Wand 1. Make sure the O-Ring is in place, then 3. Align the Nozzle with the Handle so it is thread the Spray Wand onto the Handle pointing down and tighten the Nozzle Nut. and tighten securely. Refer to Figure A. 4.
-
Page 7: Operation
Operating instructions read the EntirE iMpOrtant SaFEty inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. charging Battery pack Charge Battery Pack according to the instructions included with the 20 V Bauer Battery Charger. -
Page 8: Maintenance
Maintenance and Servicing procedures not specifically explained in this manual must be performed only by a qualified technician. tO prEVEnt SEriOuS inJury FrOM acciDEntaL OpEratiOn: Make sure that the power Switch/trigger is in the off-position and remove Battery pack before performing any procedure in this section. tO prEVEnt SEriOuS inJury FrOM tOOL FaiLurE: Do not use damaged equipment. - Page 9 Seal replacement 1. Six replacement seals are included with 2. Before replacing seals, thoroughly clean the Sprayer the Sprayer. It may become necessary as described on page 8. Refer to Figure G to replace the seals in the Spray Wand at for seal location and placement.
-
Page 10: Parts List And Diagram
parts List and Diagram pLEaSE rEaD tHE FOLLOWinG carEFuLLy THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. - Page 11 assembly Diagram Item 57230 For technical questions, please call 1-888-866-5797. Page 11...
-
Page 12: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.