Problems With The Dvd-Rom Or Multi-Function Drive - Toshiba M1 User Manual
M1 user's guide
Hide thumbs
Also See for M1:
- Maintenance manual (426 pages) ,
- Specifications (9 pages) ,
- User manual (266 pages)
Table of Contents
Advertisement
Check the communications parameters (baud rate, parity, data
bits, and stop bits) specified in the communications program.
The modem is on, configured properly, and still won't
transmit or receive data.
Make sure the line has a dial tone. Connect a telephone
handset to the line to check this.
The other system may be busy or off line. Try making a test
transmission to someone else.
Problems with the DVD-ROM or multi-function drive
You cannot access a disc in the drive.
Make sure the tray which holds the CD-ROM or DVD-ROM
is closed properly. Press gently until it clicks into place.
Open the tray and remove the disc. Make sure the tray is
clean. Any dirt or foreign object can interfere with the laser
beam.
Examine the disc to see if it is dirty. If necessary, wipe it with
a clean cloth dipped in water or a neutral cleaner.
Replace the disc in the tray. Make sure that the disc is lying
flat, label side uppermost. Make sure the disc snaps into
place. Close the tray carefully, making sure it has shut
completely.
Make sure the disk is seated properly on the spindle. It should
click into place when pushing gently onto the spindle.
You press the DVD-ROM or multi-function drive eject
button, but the drive tray doesn't slide out.
Make sure the computer is connected to a power source and
turned on. The DVD-ROM or multi-function drive eject
mechanism requires power to operate.
If you need to remove a disc and cannot turn on the computer
(for example, if the battery is completely discharged), use a
narrow object, such as a straightened paper clip, to press the
Troubleshooting Guide
Resolving a hardware conflict
203
Advertisement
Table of Contents
Troubleshooting
