Temperature modulated with electronic ignition suitable for heating potable water - not approved for space heating purposes intended for variable flow applications (60 pages)
Immediately shut off the cold water supply to the appliance should it leak. These installation instructions are intended for plumbers, heating engineers and electricians. All instructions must be observed. Failure to comply with instructions may result in RDH06101, RDH06111 – 6 720 888 202 (2019/07)
Page 3
• The continuous-flow heater is a Class I connection cable from the supply appliance and must be connected to and shut off the water supply the protective earth. before connecting the appliance! RDH06101, RDH06111 – 6 720 888 202 (2019/07)
“This appliance can be used by children • RDH 06101, RDH 06111: These appliances are designed for permanent electrical connection. of 3 years and older, as well as by people with reduced physical, sensory or RDH06101, RDH06111 – 6 720 888 202 (2019/07)
• Screw the housing cover back on. • After installation, give the user the operating instructions and explain how the appliance works. RDH06101, RDH06111 – 6 720 888 202 (2019/07)
Typical warm water output at 37 °C [l/min] Energy efficiency class Load profile Annual energy consumption [kWh] Daily energy consumption [kWh] 2.270 2.270 Sound power level [dB] Hot water heating energy efficiency Table 4 RDH06101, RDH06111 – 6 720 888 202 (2019/07)
The various assemblies can be easily dismantled. Synthetic required water temperature is achieved. materials are marked accordingly. Assemblies can therefore be sorted by composition and passed on for recycling or disposal. RDH06101, RDH06111 – 6 720 888 202 (2019/07)
Details regarding these conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be produced when making any claim under the terms of this guarantee. Subject to change without notice. RDH06101, RDH06111 – 6 720 888 202 (2019/07)