Menu 02 Display Screen; Menu 03 Application Select - UE Systems Ultraprobe 10,000 Manual

Hide thumbs Also See for Ultraprobe 10,000:

Table of Contents

MENU 03: APPLICATION SELECT

In Application Select, choose the specific application you wish to use for your inspection.

This will adjust the display panel and will save information in a format compatible with

specialized Ultratrend software.

Follow the steps to enter the Setup Mode as described earlier.

Click the Sensitivity Control Dial to enter the Application Select menu.

Spin to the application you wish to enable.

Click the Sensitivity Control Dial to select.

Press Enter.

To change the operation mode to the newly selected Application, Click the Sensitivity

Control Dial to change.

MENU 04: MODULE TYPE SELECT

Your reports can reflect the module used for your inspection. You can choose: SCM

(Scanning Module), STM (Stethoscope Module), UWC (The Parabolic Dish) CFM (Close

Focus Module), LRM (Long Range Module), FLEX (Flexible probes), RAS MT (Magnetic

mount probe), RAS RAM (Remote Access Sensor/Remote Access Module) or OTH

(Other).

TO SELECT A MODULE TYPE

Follow the steps to enter the Setup Mode as described

earlier.

Spin to Menu 04: Module Type Select.

Click to Enter.

Spin to select a Module.

Click to set.

Press the Yellow ENTER button to exit.

Table of Contents