Troubleshooting; Power Led Is Not Lit - Sony SNC-DS10 Service Manual
Hide thumbs
Also See for SNC-DS10:
- User manual (100 pages) ,
- Brochure & specs (8 pages) ,
- Installation manual (2 pages)
Table of Contents
Advertisement
4-1. Power LED is not lit
Power LED is not lit.
Is the power LED
lit when 12 V DC, 24 V AC
or PoE is input?
Is the voltage 48 V
applied between pin 6 and
pin 5 of IC1 on the PS board
when PoE is supplied?
Is 12 V DC/24 V AC
applied between pin 1 and
pin 2 of AC/DC converter
(SWR1) on the PS board when
12 V DC/24 V AC is supplied?
Is 10 V DC applied
between pin 6 and pin 5
of AC/DC converter
(SWR1)?
Is the correct voltage
(3.3 V/1.2 V/2.5 V) output
from DD1 (pin 17/pin 14/pin 11)
of the PS board respectively?
Is the correct voltage
(5 V/3.6 V/3.3 V) output
from DD2 (pin 17/pin 14/pin 11)
of the PS board respectively?
Is the correct voltage
(+15 V/_8.5 V or _5.5 V) output
from DD3 (pin 11/pin 8)
of the PS board respectively?
Is the symptom improved
by replacing with another
SY board?
Replace the SY board.
SNC-DS10/DM110
Section 4
Troubleshooting
POWER LED: D401/SY board
Yes
Is the power LED
lit only when PoE is input?
No
No
Replace IC1.
Yes
No
Replace F1 on the
PS board.
Yes
No
Replace the
AC/DC converter (SWR1).
Yes
No
Replace DD1.
Yes
No
Replace DD2.
Yes
No
Replace DD3.
Yes
No
Replace the BI board.
Yes
The power LED is not
Yes
lit only when 12 V DC
or 24 V AC is supplied.
No
Is 12 V DC/24 V AC
applied between pin 1
and pin 3 of CN809 on the
SY board when
12 V DC/24 V AC is supplied?
Is 12 V DC/24 V AC
applied between pin 1
No
and pin 2 of AC/DC converter
(SWR1) when 12 V DC/24 V AC
is supplied?
Replace the power input
cable.
No
Yes
Yes
4-1
Hide quick links:
Advertisement
Table of Contents
