Siemens SIMATIC ET 200SP Product Information
Hide thumbs
Also See for SIMATIC ET 200SP:
- System manual (320 pages) ,
- Manual (270 pages) ,
- Operating instructions manual (166 pages)
Advertisement
Quick Links
Product Information for BaseUnits
(6ES7193-6BP...) manual
SIMATIC
ET 200SP
Product Information for BaseUnits
(6ES7193-6BP...) manual
Product Information
03/2014
A5E33470493-AA
___________________
Security information
___________________
Product overview
___________________
Wiring
___________________
Technical specifications
1
2
3
4
Advertisement
Related Manuals for Siemens SIMATIC ET 200SP
Summary of Contents for Siemens SIMATIC ET 200SP
- Page 1 ___________________ Product Information for BaseUnits Security information (6ES7193-6BP...) manual ___________________ Product overview ___________________ Wiring SIMATIC ___________________ Technical specifications ET 200SP Product Information for BaseUnits (6ES7193-6BP...) manual Product Information 03/2014 A5E33470493-AA...
- Page 2 Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.
- Page 3 Table of contents Security information ..........................4 Product overview ............................ 5 Wiring ..............................7 Technical specifications .......................... 9 Product Information for BaseUnits (6ES7193-6BP...) manual Product Information, 03/2014, A5E33470493-AA...
- Page 4 Siemens recommends strongly that you regularly check for product updates. For the secure operation of Siemens products and solutions, it is necessary to take suitable preventive action (e.g. cell protection concept) and integrate each component into a holistic, state-of-the-art industrial security concept.
- Page 5 Product overview Note when you use the AUX terminals as a PE busbar: NOTICE If AUX is used as PE, AUX must be identified as green-yellow (e.g., gn/ye contact carrier covers). You must remove these identifications if the terminals are no longer used as PE. Order number 6ES7193-6BP20-0BF0 View...
- Page 6 Product overview Properties ● BaseUnit suitable for all I/O modules of the BaseUnit type "F0". Can be recognized by the last two digits of the order number. – Current carrying capacity per process terminal (terminals 1 to 4 and 9 to 12): Max. 5 A ●...
- Page 7 1 to 4 Up to 230 V AC/DC (AC only one phase) Assignment is determined by the I/O module. See I/O module manual (http://support.automation.siemens.com/WW/view/en/55679691/133300) 9 to 12 Safe extra low voltage SELV/PELV Assignment is determined by the I/O module. See I/O module manual (http://support.automation.siemens.com/WW/view/en/55679691/133300)
- Page 8 Wiring Block diagram ① Backplane bus ② I/O module ③ Terminals with connection to the I/O module ④ Connected power busbars without connection to the terminals ⑤ Connected AUX bus with connection to the terminals Figure 3-1 Block diagram BU20-P8+A4+0B Product Information for BaseUnits (6ES7193-6BP...) manual Product Information, 03/2014, A5E33470493-AA...
- Page 9 Technical specifications Technical specifications of the BaseUnit BU20-P8+A4+0B 6ES7193-6BP20-0BF0 Product type designation BU20-P8+A4+0B Supply voltage Rated value (DC) 24 V Rated value (AC) 230 V; 110 V Current carrying capacity Current carrying capacity up to 60 °C, max. 10 A Electrical isolation between backplane bus and supply voltage between process terminals and supply voltage...
- Page 10 Technical specifications Mechanical ambient conditions The following table shows the mechanical ambient conditions in the form of sinusoidal vibrations. Table 4- 1 Mechanical ambient conditions Frequency range ET 200SP with BusAdapter ET 200SP with BusAdapter BA 2×FC BA 2×RJ45/ BA 2xSCRJ 5 ≤...