Table of Contents
Advertisement
Siemens Building Technologies
Fire Safety & Security Products
Image interval time –
Each time this function is activated, it decreases the image interval time at the
chosen image sequence video output by one second. Alternatively the image
interval time can be indicated as an absolute value in seconds.
Tim.x –
If automatic image sequencing has been programmed, each press of the Cycle
output: x key combination will reduce the image interval time by one second.
Tim.
Alternatively, you can enter the period of time directly.
1.
Use the digit keys to enter the period of time
2.
Execute the Input/preselect function
3.
Enter the monitor number using the digit keys
4.
Execute the image interval time - function (Tim.)
Camera release
This function allows the user to enable his choice of video input for an automatic
picture cycle. The video output can either be selected at the keyboard using the
digit keys, or selected in the display window using the scroll bar.
Zyk.K. +
1.
Preselect the camera using the Input/preselect key
2.
Using the digit keys, enter the video output to which the image sequence is to
be switched, then execute the Release camera function.
If no number is entered for the video input, the camera that is currently
switched will be enabled.
ZyK. + x
3.
It is also possible to permanently program the video output rather than use the
digit keys to enter a number.
To do so, use the digit keys to enter the camera number you want to enable
4.
Press the Input/preselect key
5.
Then press this function key (ZyK.+x)
Programming keyboards
45
06.2008
Advertisement
Table of Contents
