hit counter script

Cancelling A Programme; At The End Of A Programme; Automatic Keeping-Warm Function; Quick Microwave - Miele M 2230 SC Operating Instructions Manual

Table of Contents

Advertisement

Operation
increments of 30 seconds when the
microwave oven is being used on
maximum power).

Cancelling a programme

 Press the Stop/C button twice.

At the end of a programme

An audible tone will sound when the
cooking programme is complete. The
interior lighting goes off.
The audible tone will sound briefly as a
reminder every 5 minutes for
20 minutes after the end of the
programme.
 If you want to stop the audible tone,
press the Stop/C button.
Automatic keeping-warm
function
The keeping warm function will switch
on automatically after the end of a
cooking programme which has used at
least 450 W, providing the door remains
closed and no buttons are pressed.
After approx. 2 minutes the keeping
warm function will switch on at 80 W for
a maximum period of 15 minutes.
, 80 W and H:H will light up in the
display.
Opening the door or operating one of
the buttons or selectors while the
keeping warm function is in progress
cancels the function.
The keeping warm function cannot be
set separately.
You can deactivate this function (see
"Changing settings").
40

Quick microwave

Pressing the Start/ button is
sufficient to set the appliance operating
on maximum power for one minute.
 Press the Start/ button.
The appliance runs at maximum power
for a cooking duration of 1 minute if the
button is not pressed again.
The cooking duration can be increased
by pressing Start during operation.
Each time the Start button is pressed,
the cooking duration increases by
another 30 seconds.

Changing the time and power level

You can change the saved time and
power level and save it as a main
application.
In the power range up to 300 watts, a
maximum of 10 minutes can be saved.
From 450 watts, a maximum of
5 minutes can be saved.
 Press the  button.
The display shows P 1.
 Select P 8 using the arrow buttons.
 Confirm your selection with OK.
 Change the power level and confirm
with OK.
 Then change the duration and
confirm with OK.
 Press the OK button if you do not
want to change a setting.
 Press the Stop/C button if you do not
want to change any other appliance
settings.

Advertisement

Table of Contents
loading

Table of Contents

Save PDF