Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2009 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
REV 15d
Advertisement
Related Manuals for Harbor Freight Tools Central Machinery 33497
Summary of Contents for Harbor Freight Tools Central Machinery 33497
- Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL.
- Page 2 Table of contents Safety ............2 Maintenance ..........9 Specifications ..........Parts List and Diagram ......10 Setup ............4 Warranty ............ 12 Operation ............ 8 WARNING SyMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
- Page 3 15. When servicing a Ram, use only identical information. If unreadable or missing, contact replacement parts – refer to attached, product- Harbor Freight Tools for a replacement. specific parts list and diagram. Follow 21. The warnings, precautions, and instructions instructions in the “User - Maintenance discussed in this instruction manual cannot Instructions”...
- Page 4 Specifications Maximum Capacity 12 Tons (24,000 pounds) Fluid Type Hydraulic Fluid Note: For additional information regarding the parts listed in the following pages, refer to the Parts List and Assembly Diagram near the end of this manual. Setup - Before Use: Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
- Page 5 Assembly (cont′d) 5. Align the holes on the Ram Ring Header (1) 7. Insert the Eye Bolts (6) into the holes in with the holes in the top of the Uprights the Ram Plate (7) and secure in place and secure in place with the Bolts (3) and with the Nuts (8).
- Page 6 Hang the Ram 1. Hang the Springs (4) on the bars of 4. Hook the Springs (4) into the Eye Bolts (6) the Ram Ring Header (1). See . to secure the Ram/Ram Plate in place. Ram Ring Header (1) 2.
- Page 7 Functions Upper Beam Handle plate Arbor plates Frame posts press Apron Base Sections Item 33497 For technical questions, please call 1-888-866-5797. Page 7...
- Page 8 Operating Instructions Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Bleeding the Ram IMpORTANT! Before first use, check for proper 2. Insert the Handle into the Plunger/Fulcrum hydraulic fluid level in the Ram.
- Page 9 General Operating Instructions 1. Place the item to press between the Arbor Plates (9). 4. When the task is completed, carefully release the Ram pressure. For safety, remove the Handle, 2. Using the Ram Handle (17), jack down the and use it to slowly turn the Valve Release Screw Ram Plate until the ram of the Ram Plate on the Ram, allowing the Ram Plate to rise.
- Page 10 Troubleshooting TO pREVENT SERIOUS INJURy: Use caution when troubleshooting a malfunctioning Ram. completely resolve all problems before use. If the solutions presented in the Troubleshooting guide do not solve the problem, have a qualified technician inspect and repair the Ram before use. After the Ram is repaired: Test it carefully without a load by raising it and lowering it fully, checking for proper operation, BEFORE RETURNING THE RAM TO OpERATION.
- Page 11 Assembly Diagram Item 33497 For technical questions, please call 1-888-866-5797. Page 11...
- Page 12 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.